Yamaha DTXpress/DTXplorer/DTXtreme

--- In DTXpress@y..., sboehmer <SBoehmer@n...> wrote:
It should work the way you want. Just make sure that the splitter you 
are using IS a splitter. It sounds as if you have a stereo cable that 
splits into two stereo jacks (or plugs). Make certain it splits the 
stereo into a right and a left. That should make it function properly!
 To test, plug your cable into a stereo headphone jack. Plug stereo 
phones in. If you have stereo out of both jacks, it is the wrong 
cable. If you get mono on the same side in each jack, it should be the 
proper cable.
Hope this helps....Scott W

I remember some time back a discussion about the use of the 9/10 
input to be
> able to trigger 2 seperate sounds. I added a PCY80s and would like 
to use
> the 9/10 inout to set up 2 seperate cymbal sounds on the original 
PCY60's. 
> 
> When I plugged in the two cymbals on a stereo Y cable I am still 
getting the
> same sound out of both and it is only registering input 9. 
> 
> Any suggestions?
> 
> Scott