Yamaha DTXpress/DTXplorer/DTXtreme

You may be on to something there ... the only Y cable I could find at Radio
Shack was a stereo headphone cable. It does not split the signal out to
right and left.

I will try and find a cable that will do what I need. Anyone have
suggestions on where they found a true splitter cable?

As always thanks for the help, I think we all would go crazy trying to
figure this stuff out on our own :)
Scott





>On Thu, 16 May 2002 02:25:58 -0000 "hairytrigger" <artifax@...>
wrote.
>--- In DTXpress@y..., sboehmer <SBoehmer@n...> wrote:
>It should work the way you want. Just make sure that the splitter you 
>are using IS a splitter. It sounds as if you have a stereo cable that 
>splits into two stereo jacks (or plugs). Make certain it splits the 
>stereo into a right and a left. That should make it function properly!
> To test, plug your cable into a stereo headphone jack. Plug stereo 
>phones in. If you have stereo out of both jacks, it is the wrong 
>cable. If you get mono on the same side in each jack, it should be the 
>proper cable.
>Hope this helps....Scott W
>
>I remember some time back a discussion about the use of the 9/10 
>input to be
>> able to trigger 2 seperate sounds. I added a PCY80s and would like 
>to use
>> the 9/10 inout to set up 2 seperate cymbal sounds on the original 
>PCY60's. 
>> 
>> When I plugged in the two cymbals on a stereo Y cable I am still 
>getting the
>> same sound out of both and it is only registering input 9. 
>> 
>> Any suggestions?
>> 
>> Scott
>
>
>
>Community email addresses:
>  Post message: DTXpress@onelist.com
>  Subscribe:    DTXpress-subscribe@onelist.com
>  Unsubscribe:  DTXpress-unsubscribe@onelist.com
>  List owner:   DTXpress-owner@onelist.com
>
>Shortcut URL to this page:
>  http://www.onelist.com/community/DTXpress 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>
>