Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Message

Re: [DTXpress] Re: Input 9/10?

2002-05-16 by Brandon Paluzzi

Look for a cable called a "return" cable at any music store.  It's used in
with a mixing board to send and return a mono signal to effects processing
gear.

In that application it works something like this:
TIP (and pigtail 1) -> send
RING (and pigtail 2) -> receive
SLEEVE -> ground

For what we need it for, it works like this:
TIP (and pigtail 1) -> Input 9
RING (and pigtail 2) -> Input 10
SLEEVE -> ground


Hope this helps,
Brandon

On Thu, 16 May 2002, sboehmer wrote:

> You may be on to something there ... the only Y cable I could find at Radio
> Shack was a stereo headphone cable. It does not split the signal out to
> right and left.
>
> I will try and find a cable that will do what I need. Anyone have
> suggestions on where they found a true splitter cable?
>
> As always thanks for the help, I think we all would go crazy trying to
> figure this stuff out on our own :)
> Scott
>
>
>
>
>
> >On Thu, 16 May 2002 02:25:58 -0000 "hairytrigger" <artifax@...>
> wrote.
> >--- In DTXpress@y..., sboehmer <SBoehmer@n...> wrote:
> >It should work the way you want. Just make sure that the splitter you
> >are using IS a splitter. It sounds as if you have a stereo cable that
> >splits into two stereo jacks (or plugs). Make certain it splits the
> >stereo into a right and a left. That should make it function properly!
> > To test, plug your cable into a stereo headphone jack. Plug stereo
> >phones in. If you have stereo out of both jacks, it is the wrong
> >cable. If you get mono on the same side in each jack, it should be the
> >proper cable.
> >Hope this helps....Scott W
> >
> >I remember some time back a discussion about the use of the 9/10
> >input to be
> >> able to trigger 2 seperate sounds. I added a PCY80s and would like
> >to use
> >> the 9/10 inout to set up 2 seperate cymbal sounds on the original
> >PCY60's.
> >>
> >> When I plugged in the two cymbals on a stereo Y cable I am still
> >getting the
> >> same sound out of both and it is only registering input 9.
> >>
> >> Any suggestions?
> >>
> >> Scott
> >
> >
> >
> >Community email addresses:
> >  Post message: DTXpress@onelist.com
> >  Subscribe:    DTXpress-subscribe@onelist.com
> >  Unsubscribe:  DTXpress-unsubscribe@onelist.com
> >  List owner:   DTXpress-owner@onelist.com
> >
> >Shortcut URL to this page:
> >  http://www.onelist.com/community/DTXpress
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> Community email addresses:
>   Post message: DTXpress@onelist.com
>   Subscribe:    DTXpress-subscribe@onelist.com
>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>   List owner:   DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/DTXpress
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  brandon@...		http://www.conquestpercussion.com

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.