Yamaha DTXpress/DTXplorer/DTXtreme

yea but not possible in a apartment ;-(

--- In DTXpress@y..., Walt <wgardus@y...> wrote:
> They're the pads for the DTXtreme, the DTXpress's big
> brother.  They are dual triggers with real heads,
> which I've exchanged for mesh heads.  Walt  
> --- hairytrigger <artifax@i...> wrote:
> > So are these RHP dual pads rather than stereo? Who
> > makes them?
> > Scott
> > 
> > --- In DTXpress@y..., Walt <wgardus@y...> wrote:
> > > On a more serious note I have found the rim
> > triggers
> > > on the RHP pads to be MUCH nicer than the stereo
> > rims.
> > >  The main pad and rim triggers have individual
> > > sensitivity controls, which allow more fine
> > tuning. I
> > > don't have a lot of miles on them yet, but so far,
> > so
> > > good!  Food for thought...Walt   
> > > --- hairytrigger <artifax@i...> wrote:
> > > > Thanks Walt. I hadn't considered that. This
> > could
> > > > solve more than one 
> > > > problem!
> > > > Scott
> > > > 
> > > > --- In DTXpress@y..., "Walt" <wgardus@y...>
> > wrote:
> > > > > Hi Scott,
> > > > > 
> > > > > This possibly could be caused by the sticks
> > you're
> > > > using Scott -
> > > > > switch to Top Banana's (
> > > > > 
> > > >
> > > 
> >
> http://www.amazon.com/exec/obidos/tg/detail/-
/B0000224VI/qid=103749707
> > > >
> > > 
> >
> 8/br=1-19/ref=br_lf_hi_19//104-6239838-3884704?
v=glance&s=hi&n=553194
> > > > > )
> > > > > 
> > > > > Walt
> > > > > --- In DTXpress@y..., "hairytrigger"
> > > > <artifax@i...> wrote:
> > > > > > Yes, the gain, sensitivity and all that
> > other
> > > > crap only works for 
> > > > the 
> > > > > > whole pad. There is no separate control for
> > the
> > > > rim. The main 
> > > > problem 
> > > > > > is the rim function on the TP80S pads. It
> > sucks!
> > > > You do have to 
> > > > really 
> > > > > > smack it to get it to respond. You have to
> > hit
> > > > it in just the 
> > > > right 
> > > > > > spot, at just the right angle and usually
> > very
> > > > hard to make it 
> > > > work. 
> > > > > > To me, that makes it totally worthless. The
> > rim
> > > > function on the 
> > > > PCY80S 
> > > > > >  works a lot better. I don't know why the
> > > > difference. I tried 
> > > > several 
> > > > > > TP80S's  and sent them all back. Again, I
> > pose
> > > > the question: Does 
> > > > > > anybody know of a GOOD stereo pad! It seems
> > like
> > > > a waste to have 
> > > > the 
> > > > > > stereo inputs and not be able to use
> > them.Does
> > > > anyone get good 
> > > > > > response with the TP80S? How the hell do you
> > do
> > > > it?
> > > > > > Scott
> > > > > > 
> > > > > > --- In DTXpress@y..., "dopmi" <mapod@w...>
> > > > wrote:
> > > > > > > i just do that but not sure there is a
> > > > difference cause i have 
> > > > to 
> > > > > > hit 
> > > > > > > Hard to make rim have the clap sound ,
> > enabled
> > > > or disabled if i 
> > > > hit 
> > > > > > > hard on rim i have a the sound , i wanted
> > to
> > > > change the "gain" 
> > > > for a 
> > > > > > > more sensitive rim when i hit it Without
> > hit
> > > > in the same time 
> > > > the 
> > > > > > > center of the pad but seem that i can only
> > > > change the gain fo 
> > > > the 
> > > > > > > center of the pad and not for the rim
> > right ? 
> > > > > > > 
> > > > > > > --- In DTXpress@y..., "hairytrigger"
> > > > <artifax@i...> wrote:
> > > > > > > > OK, Here's the only thing I can Think
> > of.
> > > > > > > > Go into VOICE EDIT mode. Scroll up thru
> > the
> > > > menus until you 
> > > > get to 
> > > > > > > > RimToPad. Select the rim trigger(by
> > hitting
> > > > it)Make sure it 
> > > > says 
> > > > > > > rim. 
> > > > > > > > Now look to see if 'RimToPad=disable' is
> > > > there. If not, make 
> > > > it 
> > > > > > > > disabled.
> > > > > > > > Hope this helps! 
> > > > > > > > Scott
> > > > > > > > 
> > > > > > > > --- In DTXpress@y..., "dopmi"
> > <mapod@w...>
> > > > wrote:
> > > > > > > > > hi , sorry if it was not clear , i
> > talk
> > > > about the TP80S pad 
> > > > , to 
> > > > > > > > > activate the sound of the rim i have
> > to
> > > > play both rim and 
> > > > center 
> > > > > > > of 
> > > > > > > > > the pad ( like a real snare drum )
> > that's
> > > > ok for most of the 
> > > > > > > > > situation but sometime i need to make
> > a
> > > > sound with Only the 
> > > > rim 
> > > > > > > of 
> > > > > > > > > the snare , for example i want to play
> > the
> > > > center of the pad 
> > > > for 
> > > > > > > a 
> > > > > > > > > clasic snare drum sound and the rim
> > for a
> > > > clap sound ,  i 
> > > > want 
> > > > > > to 
> > > > > > > > > have the clap sound with Only hit the
> > rim
> > > > not hit both rim 
> > > > and 
> > > > > > > > center 
> > > > > > > > > of pad for that .
> > > > > > > > > Stephane
> > > > > > > > > 
> > > > > > > > > --- In DTXpress@y..., "hairytrigger"
> > > > <artifax@i...> wrote:
> > > > > > > > > > What do you mean separately? What
> > type
> > > > pad do you use for 
> > > > > > > snare. A 
> > > > > > > > > > tp80s is already separated pad to
> > rim.
> > > > If you mean two 
> > > > > > separate 
> > > > > > > > > > inputs, it can't be done with a
> > stereo
> > > > pad.
> > > > > > > > > > We need more info about your
> > dilemma.
> > > > > > > > > > Scott
> > > > > > > > > > 
> > > > > > > > > > --- In DTXpress@y..., "dopmi"
> > > > <mapod@w...> wrote:
> > > > > > > > > > > Hi , i want to use the rim of my
> > snare
> > > > pad separately 
> > > > then 
> > > > > > > the 
> > > > > > > > > snare 
> > > > > > > > > >  
> > > > > > > > > > > pad , how to do that ?
> > > > > > > > > > > Thank's
> > > > 
> > > > 
> > > 
> > > 
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Web Hosting - Let the expert host your site
> > 
> === message truncated ===
> 
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Web Hosting - Let the expert host your site
> http://webhosting.yahoo.com