Yamaha DTXpress/DTXplorer/DTXtreme

I'm not sure what the problem is, but from what I remember, "learn 
mode" is the default setting. But even if it isn't, you can get to 
input 7, and then rim 7, by toggling input numbers in the voice 
menu. If you're having trouble bringing up the rim of a cymbal in 
the menu by hitting it while in learn mode, it might be because 
hitting the rim often activates the cymbal's main piezo trigger and 
leaves you there. After making sure that you're in learn mode, try 
striking the rim of pad 7 gently in a number of places until the 
voice menu reads "rim 7." Then you should be able to progam it. 
Also, if you save your user settings, you shouldn't lose them unless 
you make a permanent change. Make sure that after you create each of 
your new settings, you press "save" until the process is "complete."

Ed

--- In DTXpress@yahoogroups.com, "jadiebooshkie 
<jadiebooshkie@y...>" <jadiebooshkie@y...> wrote:
> --- In DTXpress@yahoogroups.com, Ratzo <ratzo@t...> wrote:
> > On Thu, 02 Jan 2003 19:46:22 -0000, you wrote:
> > 
> > 
> > >I DO have a stereo plug connected to this cymbal pad...how do I 
> get 
> > >to the "RIM" setting?
> > 
> > If the module is in "Learn Mode", all you have to do is hit the 
rim
> > trigger.  You don't have it plugged into trigger 9/10, do you?
> > 
> > 
> > 
> > ____________________________
> > 
> > Jim
> 
> I have it plugged into  outlet 7-"Crash"...how do I get into 
> the "Learn Mode"  I usually set it for my "acoustic kit" then 
> press "voice" then go from there...is it found in the "utility" 
> mode?  I don't wanna loose my settings for my personal acoustic 
kit, 
> I've lost them 3 times now, and it's a pain resetting the voices 
for 
> all the pads, and remembering which setting I had them on, any 
help 
> for all my dumb questions will be appreciated!