Yamaha DTXpress/DTXplorer/DTXtreme

Anko
NO! only increase it gradually until the crosstalk stops.  The menu 
reads: TRIG IN= ___ (Your cymbal pad number here_)
SPCRej=___ (Gradually increase this value)
frm=___ ( your tom pad number)

Scott

--- In DTXpress@yahoogroups.com, "ankoanko2003 <adehoop@b...>" 
<adehoop@b...> wrote:
> Thanks Scott,
> 
> About the rejection thing: should I set a high rejection value on 
the 
> cymbal here (because the cymbal is triggered when I hit the tom)?
> 
> anko
> 
> 
> --- In DTXpress@yahoogroups.com, "hairytrigger <artifax@i...>" 
> <artifax@i...> wrote:
> > It is very difficult(impossible) to play a good ride pattern on 
the 
> > rim of a stereo pad. It is more suited to crashes and special 
> effects. 
> > BUT if you change the pad type in the trigger setup munu, you can 
> > select a pad type that does not support a choke.Try Misc 1 or Misc 
> 3.
> > As for the tom/crash thing, sounds like crosstalk. Again, in the 
> > trigger setup: Specific rejection. You can set a rejection value 
> for 
> > rejecting signals from a specific pad. You may also try a 
different 
> > physical placement of the cymbal pad.
> > Scott
> > PS remember, with electronic drums, you don't have to hit the 
drums 
> as 
> > hard as acoustic drums. If you want them louder, turn up the 
volume!
> > 
> > --- In DTXpress@yahoogroups.com, "ankoanko2003 <adehoop@b...>" 
> > <adehoop@b...> wrote:
> > > I have the following problems on my dtxpress1:
> > > 
> > > Hitting tom3 causes cymbal3 (I have a 3rd stereocymbal) to sound 
> > many 
> > > a time (I suppose this is what you would call "crosstalk"?). 
> Note: 
> > > tom3 and cymbal3  do not sound together, it is or tom3 or 
cymbal3 
> > > that is triggered by the hit. I tried something with rejection, 
> but 
> > > it didn't work, probably I did something wrong.
> > > 
> > > Another problem: the rim on my stereo cymbal doesn't work as I 
> would 
> > > have it: if a play a quick figure on it, many of the hits are 
> > choked. 
> > > Changing the "gain" doesn't work here.