Yamaha DTXpress/DTXplorer/DTXtreme

Ok, silly question, but is your DTXpress in OMIN mode? If so it would
play process all MIDI info on all channels and make a bunch of noise when
it's not supposed to.... :)

-- 
Vern Graner CNE/CNA/SSE     | "If the network is down, then you're
Senior Systems Engineer     | obviously incompetent so why are we
Texas Information Services  | paying you? Of course, if the network
vern@... www.txis.com  | is up, then we obviously don't need
Cell 507-7851 Desk 328-8947 | you, so why are we paying you?" VLG



Roy D Carlson said:
> Well, I think I know what you're asking.  So yes would be the
> answer.  I can actually mute the MIDI tracks in pro tools
> controlling the Korg sound module, and the DTXpress will stop
> playing on those tracks too.  Then it just plays on channel 10.  So
> somehow when Protools is outputting midi signal to channels 1,2, and
> 10, the DTXpress is under the impression that it's supposed to play  on
> 1 and 2.  Now, I can actually turn on channel 10 on the korg, and
> it'll play with the DTXpress, but I ofcourse shut that off quite
> easily.  so I figure that the DTXpress is allowing channels 1 and 2  to
> receive signal, and in turn it plays sounds based on the song
> that's linked to the kit I select.  I can change to different songs,
> and the sounds it plays on those channels changes.
>
> I absolutly LOVE the digi001.  I've got a monster PC computer (and I
> use an athlon xp processor), and I've got two monitors tied in.  I  can
> have the mix window on one monitor and the edit window on the  other,
> and I don't ever have to switch between.  That was the best  thing I've
> done yet.  Protools is the greatest too, although it's  MIDI
> capabilities are limited.  It's analog stuff is the bomb!  the  only
> thing is that I wish plug-ins were just a little cheaper.
>
> --- In DTXpress@yahoogroups.com, "riccardo_natoli" <rnatoli@e...>
> wrote:
>> Hello Roy,
>> Have you set the tracks coming out of protools to the Digi001
> because
>> then you could be getting the sounds comining in from the sound
> module
>> out from the digi to the DTXpress and then back into protools. You
>> could just correct the output of these tracks and everything
> should be
>> fine.
>>
>> Cya,
>> Riccardo
>>
>> P.S. by the way do you like the DIGI 001? I have been using it for
>> quite a while and I think it is a great sound card. What are other
>> people out there using?
>>
>> --- In DTXpress@yahoogroups.com, "Roy D Carlson"
> <petrakid2003@y...>
>> wrote:
>> > I purchased a Yamaha DTXpress drum kit and module a while back.
> I've
>> > started on a new album, and decided that I'd hook the drum
> module up
>> > direct to my DIGI001 (Protools) system via MIDI.  I've not
> recorded
>> > the drums on this with MIDI yet, only analog.  Anyway, I create
> a
>> > track in Protools, select channel 10 as my output channel, and
> start
>> > scripting in my stuff.  Everything goes fine.  Now, I also have
> a
>> > sound module MIDI'd into my system that I use to give me piano,
>> string, etc, and I have two other MIDI tracks put down.  After
> making
>> > my drum track, I play the song.  The drums play fine, and the
> other
>> > midi tracks play fine...except the DTXPRESS is not only playing
> on
>> > channel 10, but it's also playing stuff on channel 2, and if I
> change
>> > to different songs on the DTXPRESS, it'll just to different
>> > channels.  I've gone through all the setting I know to look at,
> and I
>> > don't see anywhere how to disable other MIDI channels.  I've
> read the
>> > book, and it briefly describes how to enable channel 10, but
> that's
>> > about it.  I've varied every MIDI setting on the unit to see if
> the
>> > problem will go away, but it doesn't.  Shoot, i don't even want
> the
>> > songs enabled.  I don't use prerecorded beats.  It appears to be
>> playing MIDI from these songs that are tied into my selected
> kit.
>> > What am I missing here?  Can someone enlighten me?  Thanks  Roy
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~--> Save Smiley. Help put Messenger back in the
> office.
> http://us.click.yahoo.com/4PqtEC/anyFAA/i5gGAA/kkLolB/TM
> ---------------------------------------------------------------------~->
>
> Community email addresses:
>   Post message: DTXpress@onelist.com
>   Subscribe:    DTXpress-subscribe@onelist.com
>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>   List owner:   DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/DTXpress
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/