Yamaha DTXpress/DTXplorer/DTXtreme

--- In DTXpress@yahoogroups.com, "gordonbakos420" <g.bakos@i...> 
wrote:
> I think we're on the same page... since I could use a stereo cable 
> in the 9/10 on a two zone, while the pcy65 jack is bouncing back 
and 
> forth between the two rings on the stereo plug, the module 
sometimes 
> sees it as a 9 and sometimes a 10.  BTW, I had lousy luck actually 
> using a two zone with the 9/10 input. I finally wound up plugging 
my 
> extra pcy65s into the ride and my pcy65 into the 9/10 (I use that 
> for the ride).

I just want to make sure that we are on the same page, because luck 
should have nothing to do with how 9/10 behaves with a dual-zone pad 
inserted. From what you wrote earlier, I'm assuming that you are 
informed about the difference between stereo and dual zone and that 
you weren't just saying that the PCY65s didn't work properly in 9/10, 
which would be true in principle. That being the case, which dual-
zone pad didn't work well and why? Also, unless someone can confirm 
your experience with 9/10 and a stereo cable connected to a mono pad, 
I'm not convinced that your cable isn't faulty.

Ed