Yamaha DTXpress/DTXplorer/DTXtreme

--- Jerry Davis wrote:
> Sounds good can you break it down in exact
> lay mans terms for me please.

You will need a "TRS splitter" - a stereo 1/4" jack plug to two mono 
1/4" jack sockets. This splits the tip and ring from the stereo 
plug, one to the tip of one mono socket and one to the tip of the 
other. This allows you to address inputs 9 and 10 separately, one on 
each mono jack socket. You then take the existing mono PCY65 cymbal 
out of input 6, and plug it into one side of the splitter (on input 
10). Then you take the two outputs of the Visulite ride, and plug 
the bow into input 6, and the bell into the other half of the 
splitter on input 9.

The attenuation DIP switches are on the back of the module, right 
next to input 8. You may need to flip the switch for input 6 to the 
high position to get the Visulite to trigger cleanly.

This is the splitter you need at Drumbalaya:
http://shop.drumbalaya.com/s.nl/c.ACCT97787/sc.2/category.38/it.A/id.
391/.f

Stewart