Bongo, The Y adapter needed takes the tip/sleeve(mono) and ring/sleeve(mono) and combines to a tip/ring/sleeve(stereo) jack that plugs into the module. The only inputs on the module that you can use this with is inputs 9/10. You will need to setup trigger for input 9 to the type of pad that is plugged into it and setup trigger for input 10 to the type of pad that is plugged into it. Then setup of the voices for each of the trigger inputs 9/10. To see if the threezone pad is working properly, then try setting the voices to something completely different. Set the pad as a snare voice, rim1 as a cymbal voice and rim2 as a woodblock, and set the volume for each at 127. Then strike each surface by itself, and let us know the results, and we can go from there. OGD > -----Original Message----- > From: bongokonzelmann [SMTP:carsten@...] > Sent: Thursday, March 18, 2004 2:08 PM > To: DTXpress@yahoogroups.com > Subject: [DTXpress] DTXP III: switches, Y-plug > > As a newbie on the DTXP III two questions: > - Somebody told me that using a so called Y-plug gives the possibility > to run two pads (mono) on one trigger input with different sounds. How > do you have to do the settings for that? I assume that the trigger > settings in any case are common to both sounds, right? > - I never really understood how the switches in the > two-zone/three-zone pads work in comparison to the trigger. I�m still > struggling with the snare pad and the cross-stick sound triggering as > it only gives the cross-stick sounds when hit hard. I�d like it to > react much more sensitive. > > Anybody there to help out? > > Regards -Bongo- > > > > Community email addresses: > Post message: DTXpress@yahoogroups.com > Subscribe: DTXpress-subscribe@yahoogroups.com > Unsubscribe: DTXpress-unsubscribe@yahoogroups.com > List owner: DTXpress-owner@yahoogroups.com > > Shortcut URL to this page: > <http://groups.yahoo.com/group/DTXpress> > > Alternate DTXpress site: > <http://www.dtxpressions.com> > > > > _____ > > Yahoo! Groups Links > > > * To visit your group on the web, go to: > <http://groups.yahoo.com/group/DTXpress/> > > * To unsubscribe from this group, send an email to: > DTXpress-unsubscribe@yahoogroups.com > <mailto:DTXpress-unsubscribe@yahoogroups.com?subject=Unsubscribe> > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > <http://docs.yahoo.com/info/terms/>. > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
Message
RE: [DTXpress] DTXP III: switches, Y-plug
2004-03-18 by rdamon@mckinney-usa.com
Attachments
- No local attachments were found for this message.