Glen, You can look in the photo gallery of this site and see what the inside of the PCY65S looks like. The rim switch is actually a pair of split ribbons that run along the edge of the plastic wedge. Historically, starting with the PCY80S and then with the PCY65S, rim ribbon switch have been a problem area. I have an assortment of the PCY65/65S/80S. The PCY80S are the most troublesome in regards to the ribbon rim switch. If I strike the edge of the pad with the stick nearly parallel with the pad surface 9 times out 10, unless it is a glancing blow the cymbal will choke un-intentually. If I strike the edge at a sharper angle with the stick being 45 degrees from parallel with the pad surface the edge will trigger properly 9 times out of 10. The PCY65S have less of a problem with this as the edge design was changed slightly. The problem with the rim switch is it is being used as a dual purpose device, one as the edge switch to trigger the rim voice and secondly as pressure sensor to detect if it is being held. It is that time delay that in many cases is the problem. The time delay is not adjustable either. If a brief contact is made with the ribbon switch it is interrpeted as a normal strike and the rim voice is triggered. If the amount of contact time with the rim switch is longer (i.e. it is physically being held) then it interrpeted as a choke and the pad and rim voices are cut short. So, you may indeed have a bad PCY65S, but you may also find that in the end, as with most edrum issues it comes down to technique. OGD (OldGuyDrummer) _____ From: Glen D. Earl Subject: RE: [DTXpress] Re: DTXPRESS III Wedge Stereo Cymbal Problem That's probably exactly what it is, is a faulty rim switch. ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
Message
RE: [DTXpress] Re: DTXPRESS III Wedge Stereo Cymbal Problem
2004-06-15 by rdamon@mckinney-usa.com
Attachments
- No local attachments were found for this message.