Pintech dual-zone not triggering the rim
1999-12-12 by vcrmac@earthlink.net
Hi Jim, I'm usually good for the "duh" solutions that people have already tried so don't be insulted... Are you running a stereo cord out of the pad and into the module? You could be running into the same problem that some of us had in the setup when we unknowingly used a mono plug for the hi-hat and couldn't get the open or spash sounds. Even if you're running a splitter from the pad to mono into the module, it won't work, as the unit will only read one of the triggers. It needs stereo out and in. Hope this is a simple solution that works as I also hope to get a Pintech for my snare if all you guinea pigs can work out the bugs. Ha. Later, Rick ---------------------------------------- Date: 12 Dec 1999 03:13:01 -0000 From: musso@...
Show quoted textHide quoted text
Subject: pintech dual zone I purchased a concertcast pad from pintech at another store today, and cannot seem to get it to trigger off the rim on either the sw. on the snare or on input 9/10. So I cannot say they are in fact compatible. It appeared to work at the place where I first purchased the dtxpress, so I may have a bad pad/trigger. I'll have to investigate this further. Sorry for the confusion. I guess it still a ???? regarding Pintechs(dual zone) on the dtxpress.Jim