RE: Spam:Spam:[DTXpress] Re: Only getting sound when letting go of pedal
2006-09-12 by Damon, Rob
Keith, I am not sure what is magical about input no. 1, but the manual does specifically identify that input as the only one that the HH can be plugged into when you are using it as a kick pedal. All of my gear is packed up because of moving to a new house, so I can't do any testing, maybe somebody else can. The manual also implies that you must still use a stereo cable when you plug the HH into input no. 1, although that may only be for when you use it in input 8 as a standard Hihat pedal. You could still use input 8 to plug the HH into and assign the foot splash sound to it, but I don't think it would be reliable, even if you set the footsplash trigger to a low number. I also wonder if it would be possible to move the KP up to input 9/10 and plug the HH into the aux-in of the KP and set the swap function for the inputs 1->9/10 in the setup. Again, I would try it but can't get to my gear. OGD ________________________________
Show quoted textHide quoted text
From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On Behalf Of Keith Sent: Monday, September 11, 2006 6:44 PM To: DTXpress@yahoogroups.com Subject: Spam:Spam:[DTXpress] Re: Only getting sound when letting go of pedal --- In DTXpress@yahoogroups.com <mailto:DTXpress%40yahoogroups.com> , "Damon, Rob" <rdamon@...> wrote: > > Just a thought. Are you connecting it to input no. 1? > > Input no. 1 is the only one that can be configured for the HH pedal. > See Page 12 of the reference guide. OGD, Now I'm confused! Isn't input 1 the kick, input 8 the hi-hat and the un-numbered input below 7&8 on the back the HH pedal? Same effect - you cannot use it to replace a piezo pad. I did mess about with a couple of connectors to make a patch lead to try to cheat and use the internal pull-up on the ring to pull up the tip. It sort of works - but backwards. A bit of circuitry (transistor, a couple of resistors, a capacitor and a power supply) could be used to fix it, but you need to be handy at building electronics. Keith. ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________