Yamaha DTXpress/DTXplorer/DTXtreme

What happens when you change the voice or note number on tom2? Can 
you tell if it's registering the hit but not producing a sound, or 
it's simply not registering the hit?

Okan

--- In DTXpress@y..., "Sam P." <evolve555@h...> wrote:
> I was at rehearsal the other day when all of a sudden one of my tom 
pads went out. The thing is, the one that went out was on Tom2, and I 
assigned a bass drum to it because I was playing along with loops on 
those pads. So I immediately switched to another kit to troubleshoot 
the problem, and alas, that pad was out on other kits. So I switched 
it one last time and the pad came back to life, but only on kits that 
weren't assigned that particular bass drum sound that I assigned to 
it. When it's any other kit, the pad works great. When it's a kit 
that I am using that I assigned that particular bass drum to that 
pad, that pad doesn't play at all. But the pad still triggers, 
obviously because it works on other kits and it triggers it to switch 
when I hit the pad when I go into the VOICE edit mode. It is the most 
bizarre thing.. any clues?

> Thanks
> Sam
> www.imperativereaction.com

That's weird. Hope it never happens again...

Okan
--- In DTXpress@y..., "Sam P." <evolve555@h...> wrote:
> It is definately registering the hit, (I basically went into the 
voice edit function and hit other pads and watched it change, and 
sure enough I hit tom2 and it swithed as well and showed that it 
registered the hit, even gave me a velocity reading but no sound) 
basically I think I somehow globally turned off all the bass drums, 
because I noticed the problem affected only the kick sounds. I wrote 
down all my settings for each pad, and then I reset the entire unit 
back to it's factory settings and remapped my kits. Painstaking 
process but it worked and did it just in time to make the show..
>   ----- Original Message ----- 
>   From: okant 
>   To: DTXpress@y... 
>   Sent: Sunday, July 07, 2002 10:45 PM
>   Subject: [DTXpress] Re: Anyone else ever had this problem?
> 
> 
>   What happens when you change the voice or note number on tom2? 
Can 
>   you tell if it's registering the hit but not producing a sound, 
or 
>   it's simply not registering the hit?
> 
>   Okan
> 
>   --- In DTXpress@y..., "Sam P." <evolve555@h...> wrote:
>   > I was at rehearsal the other day when all of a sudden one of my 
tom 
>   pads went out. The thing is, the one that went out was on Tom2, 
and I 
>   assigned a bass drum to it because I was playing along with loops 
on 
>   those pads. So I immediately switched to another kit to 
troubleshoot 
>   the problem, and alas, that pad was out on other kits. So I 
switched 
>   it one last time and the pad came back to life, but only on kits 
that 
>   weren't assigned that particular bass drum sound that I assigned 
to 
>   it. When it's any other kit, the pad works great. When it's a kit 
>   that I am using that I assigned that particular bass drum to that 
>   pad, that pad doesn't play at all. But the pad still triggers, 
>   obviously because it works on other kits and it triggers it to 
switch 
>   when I hit the pad when I go into the VOICE edit mode. It is the 
most 
>   bizarre thing.. any clues?
>   > Thanks
>   > Sam
>   > www.imperativereaction.com
> 
> 
>   Community email addresses:
>     Post message: DTXpress@o...
>     Subscribe:    DTXpress-subscribe@o...
>     Unsubscribe:  DTXpress-unsubscribe@o...
>     List owner:   DTXpress-owner@o...
> 
>   Shortcut URL to this page:
>     http://www.onelist.com/community/DTXpress 
> 
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.