Yamaha DTXpress/DTXplorer/DTXtreme

Hi Jay,

Yes, I had the same issue with mine before I traded
up.  I think on mine the source was at the hinge
between the bottom plate and the upright plate.  Walt
--- Jay Welch <jay@...> wrote:
> Hello,
> 
> I just replaced my kick tower with the vertikik and
> so far I am pleased.  It seems to be well built and
> sturdy.  The only complaint is when the tower is
> struck hard it rings like a bell due to the metal
> vibrating.  Anyone had this problem?   If I put just
> a slight amount of pressure against the metal it
> will keep it from ringing.  I am thinking about
> taping something to the tower to get rid of the
> ring.  Any one had this problem?
> 
> Regards,
> Jay


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

yeah ,
   i had the same thing happen on both of mine, there are small allen 
head screws on both sides of where the upright section meets the 
plate ,and if you give them a slight more of a turn from just being 
snug it solved the problem immediately 

ps. how was the cruise walt??

sam(otacon28) 

--- In DTXpress@yahoogroups.com, Walt <wgardus@y...> wrote:

> Hi Jay,
> 
> Yes, I had the same issue with mine before I traded
> up.  I think on mine the source was at the hinge
> between the bottom plate and the upright plate.  Walt
> --- Jay Welch <jay@s...> wrote:
> > Hello,
> > 
> > I just replaced my kick tower with the vertikik and
> > so far I am pleased.  It seems to be well built and
> > sturdy.  The only complaint is when the tower is
> > struck hard it rings like a bell due to the metal
> > vibrating.  Anyone had this problem?   If I put just
> > a slight amount of pressure against the metal it
> > will keep it from ringing.  I am thinking about
> > taping something to the tower to get rid of the
> > ring.  Any one had this problem?
> > 
> > Regards,
> > Jay
> 
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com

Cruise was wonderful, and if anyone sails on Carnivals
Pride, check out the band on the Lido deck in the
afternoons - notice the DTXpress!!!
--- "otacon28us <reva@...>"
<reva@...> wrote:
> yeah ,
>    i had the same thing happen on both of mine,
> there are small allen 
> head screws on both sides of where the upright
> section meets the 
> plate ,and if you give them a slight more of a turn
> from just being 
> snug it solved the problem immediately 
> 
> ps. how was the cruise walt??
> 
> sam(otacon28) 
> 
> --- In DTXpress@yahoogroups.com, Walt <wgardus@y...>
> wrote:
> > Hi Jay,
> > 
> > Yes, I had the same issue with mine before I
> traded
> > up.  I think on mine the source was at the hinge
> > between the bottom plate and the upright plate. 
> Walt
> > --- Jay Welch <jay@s...> wrote:
> > > Hello,
> > > 
> > > I just replaced my kick tower with the vertikik
> and
> > > so far I am pleased.  It seems to be well built
> and
> > > sturdy.  The only complaint is when the tower is
> > > struck hard it rings like a bell due to the
> metal
> > > vibrating.  Anyone had this problem?   If I put
> just
> > > a slight amount of pressure against the metal it
> > > will keep it from ringing.  I am thinking about
> > > taping something to the tower to get rid of the
> > > ring.  Any one had this problem?
> > > 
> > > Regards,
> > > Jay
> > 
> > 
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> > http://mailplus.yahoo.com
> 
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

Thanks,  I will give that a try when I get home.

> yeah ,
>    i had the same thing happen on both of mine, there are small allen
> head screws on both sides of where the upright section meets the
> plate ,and if you give them a slight more of a turn from just being
> snug it solved the problem immediately
>
> ps. how was the cruise walt??
>
> sam(otacon28)
>
> --- In DTXpress@yahoogroups.com, Walt <wgardus@y...> wrote:
> > Hi Jay,
> >
> > Yes, I had the same issue with mine before I traded
> > up.  I think on mine the source was at the hinge
> > between the bottom plate and the upright plate.  Walt
> > --- Jay Welch <jay@s...> wrote:
> > > Hello,
> > >
> > > I just replaced my kick tower with the vertikik and
> > > so far I am pleased.  It seems to be well built and
> > > sturdy.  The only complaint is when the tower is
> > > struck hard it rings like a bell due to the metal
> > > vibrating.  Anyone had this problem?   If I put just
> > > a slight amount of pressure against the metal it
> > > will keep it from ringing.  I am thinking about
> > > taping something to the tower to get rid of the
> > > ring.  Any one had this problem?
> > >
> > > Regards,
> > > Jay
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> > http://mailplus.yahoo.com
>
>
> Community email addresses:
>   Post message: DTXpress@onelist.com
>   Subscribe:    DTXpress-subscribe@onelist.com
>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>   List owner:   DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/DTXpress
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>