Yamaha DTXpress/DTXplorer/DTXtreme

Hey everybody!  Does anyone know if drumbalaya carries the 
neccessary parts to make a T-Leg?  I just attached a 33 inch arm to 
my set and I wanted to make it a little more stable with the extra 
leg.  Or has anyone ever made one even?  Thanks!!

-UN.H

UNH,

I can give you an unqualified "yes," because Ed Morin has all my old 
Yamaha T-legs.

Ed

--- In DTXpress@yahoogroups.com, "underneathheaven" <realvast@s...> 
wrote:
> Hey everybody!  Does anyone know if drumbalaya carries the 
> neccessary parts to make a T-Leg?  I just attached a 33 inch arm 
to 

> my set and I wanted to make it a little more stable with the extra 
> leg.  Or has anyone ever made one even?  Thanks!!
> 
> -UN.H

UN.H
You need  a T-Fitting (TFG-150 #11592)-You can get it
from Drumbalaya....I got mine from them.
Jade
--- underneathheaven <realvast@...> wrote:
> Hey everybody!  Does anyone know if drumbalaya
> carries the 
> neccessary parts to make a T-Leg?  I just attached a
> 33 inch arm to 
> my set and I wanted to make it a little more stable
> with the extra 
> leg.  Or has anyone ever made one even?  Thanks!!
> 
> -UN.H
> 
> 


__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com

UNH
Almost forgot...you would have to buy another rack
pipe-one for the main leg, and one for the actual
foot...and don't forget rubber shoes for the actual
feet.
Jade
--- Jade <jadiebooshkie@...> wrote:
> UN.H
> You need  a T-Fitting (TFG-150 #11592)-You can get
> it
> from Drumbalaya....I got mine from them.
> Jade
> --- underneathheaven <realvast@...> wrote:
> > Hey everybody!  Does anyone know if drumbalaya
> > carries the 
> > neccessary parts to make a T-Leg?  I just attached
> a
> > 33 inch arm to 
> > my set and I wanted to make it a little more
> stable
> > with the extra 
> > leg.  Or has anyone ever made one even?  Thanks!!
> > 
> > -UN.H
> > 
> > 
> 
> 
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
> http://search.yahoo.com
> 


__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com

Jade, about how much was your total cost?

-UN.H




--- In DTXpress@yahoogroups.com, Jade <jadiebooshkie@y...> wrote:

> UNH
> Almost forgot...you would have to buy another rack
> pipe-one for the main leg, and one for the actual
> foot...and don't forget rubber shoes for the actual
> feet.
> Jade
> --- Jade <jadiebooshkie@y...> wrote:
> > UN.H
> > You need  a T-Fitting (TFG-150 #11592)-You can get
> > it
> > from Drumbalaya....I got mine from them.
> > Jade
> > --- underneathheaven <realvast@s...> wrote:
> > > Hey everybody!  Does anyone know if drumbalaya
> > > carries the 
> > > neccessary parts to make a T-Leg?  I just attached
> > a
> > > 33 inch arm to 
> > > my set and I wanted to make it a little more
> > stable
> > > with the extra 
> > > leg.  Or has anyone ever made one even?  Thanks!!
> > > 
> > > -UN.H
> > > 
> > > 
> > 
> > 
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> > 
> 
> 
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
> http://search.yahoo.com

The T clamp was $8, the "feet" was $6, the Std 1.5
inch tubing (1 ft. piece)-this sets on the floor
T<-upside down the 1 ft piece is the "top" of the
letter T----this piece was $7, and the Std. 1.5 tubing
for the straight piece of the T was $22.  I still have
the clamps, 4' piece and some "feet" (these go on the
end of the bottom T piece on each side).  I saved
these pieces for future use.  I had to add a T to
mount my one brain on the rack to give it stability.
Hope this helps ya out, good buddy!
Jade
--- underneathheaven <realvast@...> wrote:
> Jade, about how much was your total cost?
> 
> -UN.H
> 
> 
> 
> 
> --- In DTXpress@yahoogroups.com, Jade
> <jadiebooshkie@y...> wrote:
> > UNH
> > Almost forgot...you would have to buy another rack
> > pipe-one for the main leg, and one for the actual
> > foot...and don't forget rubber shoes for the
> actual
> > feet.
> > Jade
> > --- Jade <jadiebooshkie@y...> wrote:
> > > UN.H
> > > You need  a T-Fitting (TFG-150 #11592)-You can
> get
> > > it
> > > from Drumbalaya....I got mine from them.
> > > Jade
> > > --- underneathheaven <realvast@s...> wrote:
> > > > Hey everybody!  Does anyone know if drumbalaya
> > > > carries the 
> > > > neccessary parts to make a T-Leg?  I just
> attached
> > > a
> > > > 33 inch arm to 
> > > > my set and I wanted to make it a little more
> > > stable
> > > > with the extra 
> > > > leg.  Or has anyone ever made one even? 
> Thanks!!
> > > > 
> > > > -UN.H
> > > > 
> > > > 
> > > 
> > > 
> > > __________________________________
> > > Do you Yahoo!?
> > > The New Yahoo! Search - Faster. Easier. Bingo.
> > > http://search.yahoo.com
> > > 
> > 
> > 
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> 
> 


__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com