Yamaha DTXpress/DTXplorer/DTXtreme

a short message to everyone in this group. i'm currently tryin 2 
setup a discussion group for anybody who owns, uses or is interested 
in hart hardware. if your interested please join, or perhaps u may 
know somebody who might be - let 'em know!!

cheers
pete

Hi Pete,

Sounds like a great idea. I was wondering when one of those would 
start. Some of us with Yamaha electronics have had difficulties 
integrating Hart equipment. The Hart ECII ride, the hats, and the 
Acusnare, in particular, have come up as trouble spots, though I 
recall that at least one member of this board has had a more 
favorable experience. At any rate, Hart apparently is aware of the 
problem, but has shown little interest in exploring it. Maybe your 
new group will have the opportunity to delve more deeply into it. 
Good luck.

Ed

--- In DTXpress@yahoogroups.com, "peterpan" <malakies2000@y...> 
wrote:
> 
> a short message to everyone in this group. i'm currently tryin 2 
> setup a discussion group for anybody who owns, uses or is 
interested 

> in hart hardware. if your interested please join, or perhaps u may 
> know somebody who might be - let 'em know!!
> 
> cheers
> pete

hopefully the group will be able to tackle issues like that, i also 
forgot to mention the URL, so here it is!!

http://groups.yahoo.com/group/Hartdrums


as well as all this i got a question regarding the dtx pad 
compatability. i'm seriously considering slashing out on a roland td-
8 as the brain for the hart kit. but i also would like to hook up a 
few of my dtxpress pads to my new kit and run them throught the td-8, 
is this possible? has anybody run yamaha pads through roland brains?

cheers guys and thanks for the support ed - much appreciated
pete



--- In DTXpress@yahoogroups.com, "liberatusvirus" 
<liberatusvirus@y...> wrote:
> Hi Pete,
> 
> Sounds like a great idea. I was wondering when one of those would 
> start. Some of us with Yamaha electronics have had difficulties 
> integrating Hart equipment. The Hart ECII ride, the hats, and the 
> Acusnare, in particular, have come up as trouble spots, though I 
> recall that at least one member of this board has had a more 
> favorable experience. At any rate, Hart apparently is aware of the 
> problem, but has shown little interest in exploring it. Maybe your 
> new group will have the opportunity to delve more deeply into it. 
> Good luck.
> 
> Ed
> 
> --- In DTXpress@yahoogroups.com, "peterpan" <malakies2000@y...> 
> wrote:
> > 
> > a short message to everyone in this group. i'm currently tryin 2 
> > setup a discussion group for anybody who owns, uses or is 
> interested 
> > in hart hardware. if your interested please join, or perhaps u 
may 

> > know somebody who might be - let 'em know!!
> > 
> > cheers
> > pete

Pete,

The rubber pads should work with the TD8, even if with a little 
tweaking. The basic piezo/FSR configuration doesn't vary much. Many 
people run Roland and Pintech rubber pads through Yamaha modules. 

Ed

--- In DTXpress@yahoogroups.com, "peterpan" <malakies2000@y...> 
wrote:
> 
> hopefully the group will be able to tackle issues like that, i 
also 
> forgot to mention the URL, so here it is!!
> 
> http://groups.yahoo.com/group/Hartdrums
> 
> 
> as well as all this i got a question regarding the dtx pad 
> compatability. i'm seriously considering slashing out on a roland 
td-
> 8 as the brain for the hart kit. but i also would like to hook up 
a 
> few of my dtxpress pads to my new kit and run them throught the td-
8, 
> is this possible? has anybody run yamaha pads through roland 
brains?
> 
> cheers guys and thanks for the support ed - much appreciated
> pete
> 
> 
> 
> --- In DTXpress@yahoogroups.com, "liberatusvirus" 
> <liberatusvirus@y...> wrote:
> > Hi Pete,
> > 
> > Sounds like a great idea. I was wondering when one of those 
would 
> > start. Some of us with Yamaha electronics have had difficulties 
> > integrating Hart equipment. The Hart ECII ride, the hats, and 
the 
> > Acusnare, in particular, have come up as trouble spots, though I 
> > recall that at least one member of this board has had a more 
> > favorable experience. At any rate, Hart apparently is aware of 
the 
> > problem, but has shown little interest in exploring it. Maybe 
your 
> > new group will have the opportunity to delve more deeply into 
it. 
> > Good luck.
> > 
> > Ed
> > 
> > --- In DTXpress@yahoogroups.com, "peterpan" <malakies2000@y...> 
> > wrote:
> > > 
> > > a short message to everyone in this group. i'm currently tryin 
2 

> > > setup a discussion group for anybody who owns, uses or is 
> > interested 
> > > in hart hardware. if your interested please join, or perhaps u 
> may 
> > > know somebody who might be - let 'em know!!
> > > 
> > > cheers
> > > pete

great, thanks Ed..




--- In DTXpress@yahoogroups.com, "liberatusvirus" 
<liberatusvirus@y...> wrote:
> Pete,
> 
> The rubber pads should work with the TD8, even if with a little 
> tweaking. The basic piezo/FSR configuration doesn't vary much. Many 
> people run Roland and Pintech rubber pads through Yamaha modules. 
> 
> Ed
> 
> --- In DTXpress@yahoogroups.com, "peterpan" <malakies2000@y...> 
> wrote:
> > 
> > hopefully the group will be able to tackle issues like that, i 
> also 
> > forgot to mention the URL, so here it is!!
> > 
> > http://groups.yahoo.com/group/Hartdrums
> > 
> > 
> > as well as all this i got a question regarding the dtx pad 
> > compatability. i'm seriously considering slashing out on a roland 
> td-
> > 8 as the brain for the hart kit. but i also would like to hook up 
> a 
> > few of my dtxpress pads to my new kit and run them throught the 
td-
> 8, 
> > is this possible? has anybody run yamaha pads through roland 
> brains?
> > 
> > cheers guys and thanks for the support ed - much appreciated
> > pete
> > 
> > 
> > 
> > --- In DTXpress@yahoogroups.com, "liberatusvirus" 
> > <liberatusvirus@y...> wrote:
> > > Hi Pete,
> > > 
> > > Sounds like a great idea. I was wondering when one of those 
> would 
> > > start. Some of us with Yamaha electronics have had difficulties 
> > > integrating Hart equipment. The Hart ECII ride, the hats, and 
> the 
> > > Acusnare, in particular, have come up as trouble spots, though 
I 
> > > recall that at least one member of this board has had a more 
> > > favorable experience. At any rate, Hart apparently is aware of 
> the 
> > > problem, but has shown little interest in exploring it. Maybe 
> your 
> > > new group will have the opportunity to delve more deeply into 
> it. 
> > > Good luck.
> > > 
> > > Ed
> > > 
> > > --- In DTXpress@yahoogroups.com, "peterpan" <malakies2000@y...> 
> > > wrote:
> > > > 
> > > > a short message to everyone in this group. i'm currently 
tryin 
> 2 
> > > > setup a discussion group for anybody who owns, uses or is 
> > > interested 
> > > > in hart hardware. if your interested please join, or perhaps 
u 

> > may 
> > > > know somebody who might be - let 'em know!!
> > > > 
> > > > cheers
> > > > pete