Yahoo Groups archive
Thread
2003-12-15 by sirius9x
Hola, I have my kickpad via stereo cable in input 9/10 and a mono cymbalpad in the build in splitter at my kickpad (input on kickpad). The problem is when I play cymbal and kick at the same time I only get the cymbal sound. I don't know what to do, Rejection-things don't work. Has anybody an idea? Daniel
2003-12-15 by rdamon@mckinney-usa.com
Daniel, Things to try (these maybe things that you have already tried): (By the way I am assuming you are using a KP65, PCY65 on a DTxpress II module, is that correct??) To rule out it being a cable problem: 1. Use a different stereo cable between the module 9/10 input jack and the KP65 output jack. (Do not use a mono cable between module and KP65). 2. Use a different mono cable between the KP65 output jack and the mono pad. (Do not use a stereo cable between the mono pad and the KP65) 3. Make sure Zone 9 is setup for a KP65 and that Zone 10 is setup for a PCY65. 4. Since the two piezos are physically located far apart, make sure that the specific reject setting is 0 between zones 9 and 10 and between 10 and 9. You have to set it in two locations, on trigger input zone 9 and on trigger input 10. 5. Try attaching a different mono pad to the input jack on the KP65. Make sure you change the pad type in the trigger setup menu. (Any stereo pad will work for this purpose as well.) 6. If you have access to a Y-Splitter cable (stereo to 2-mono left/right jacks) try plugging in two mono pads, say two TP65 and setup the triggers. Let us know how these work out. OGD > -----Original Message----- > From: sirius9x [SMTP:4dddd@...] > Sent: Monday, December 15, 2003 4:53 AM > To: DTXpress@yahoogroups.com > Subject: [DTXpress] Problem with input 9/10 > > Hola, > > I have my kickpad via stereo cable in input 9/10 and a mono cymbalpad > in the build in splitter at my kickpad (input on kickpad). The problem > is when I play cymbal and kick at the same time I only get the cymbal > sound. I don't know what to do, Rejection-things don't work. > Has anybody an idea? > > Daniel > > > > Yahoo! Groups Sponsor > ADVERTISEMENT > click here > <http://rd.yahoo.com/SIG=12ceabih8/M=267637.4116732.5333197.1261774/D=egro > upweb/S=1705031972:HM/EXP=1071568440/A=1853619/R=0/*http://www.netflix.com > /Default?mqso=60178356&partid=4116732> > > <http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupm > ail/S=:HM/A=1853619/rand=625298721> > > Community email addresses: > Post message: DTXpress@yahoogroups.com > Subscribe: DTXpress-subscribe@yahoogroups.com > Unsubscribe: DTXpress-unsubscribe@yahoogroups.com > List owner: DTXpress-owner@yahoogroups.com > > Shortcut URL to this page: > <http://groups.yahoo.com/group/DTXpress> > > Alternate DTXpress site: > <http://www.dtxpressions.com> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > <http://docs.yahoo.com/info/terms/>. > ________________________________________________________________________ > This email has been scanned for all viruses by the MessageLabs Email > Security System. For more information on a proactive email security > service working around the clock, around the globe, visit > <http://www.messagelabs.com> > ________________________________________________________________________ > ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs Email Security System. For more information on a proactive email security service working around the clock, around the globe, visit http://www.messagelabs.com ________________________________________________________________________
2003-12-15 by rdamon@mckinney-usa.com
Followup note: On item no 6 below, plug the Y-cable into Zone 9/10 by itself, thus not using the KP65, just to see if there is a problem with zone 9/10 input. OGD > -----Original Message----- > From: rdamon@... [SMTP:rdamon@...] > Sent: Monday, December 15, 2003 3:53 PM > To: DTXpress@yahoogroups.com > Subject: RE: [DTXpress] Problem with input 9/10 > > Daniel, > > Things to try (these maybe things that you have already tried): > (By the way I am assuming you are using a KP65, PCY65 on a DTxpress II > module, is that correct??) > > To rule out it being a cable problem: > 1. Use a different stereo cable between the module 9/10 input jack and the > KP65 output jack. (Do not use a mono cable between module and KP65). > 2. Use a different mono cable between the KP65 output jack and the mono > pad. > (Do not use a stereo cable between the mono pad and the KP65) > > 3. Make sure Zone 9 is setup for a KP65 and that Zone 10 is setup for a > PCY65. > 4. Since the two piezos are physically located far apart, make sure that > the > specific reject setting is 0 between zones 9 and 10 and between 10 and 9. > You have to set it in two locations, on trigger input zone 9 and on > trigger > input 10. > 5. Try attaching a different mono pad to the input jack on the KP65. Make > sure you change the pad type in the trigger setup menu. (Any stereo pad > will > work for this purpose as well.) > > 6. If you have access to a Y-Splitter cable (stereo to 2-mono left/right > jacks) try plugging in two mono pads, say two TP65 and setup the triggers. > > Let us know how these work out. > > OGD > > > -----Original Message----- > > From: sirius9x [SMTP:4dddd@...] > > Sent: Monday, December 15, 2003 4:53 AM > > To: DTXpress@yahoogroups.com > > Subject: [DTXpress] Problem with input 9/10 > > > > Hola, > > > > I have my kickpad via stereo cable in input 9/10 and a mono cymbalpad > > in the build in splitter at my kickpad (input on kickpad). The problem > > is when I play cymbal and kick at the same time I only get the cymbal > > sound. I don't know what to do, Rejection-things don't work. > > Has anybody an idea? > > > > Daniel > > > > > > > > Yahoo! Groups Sponsor > > ADVERTISEMENT > > click here > > < > <http://rd.yahoo.com/SIG=12ceabih8/M=267637.4116732.5333197.1261774/D=egro > > > > upweb/S=1705031972:HM/EXP=1071568440/A=1853619/R=0/* > <http://www.netflix.com> > > /Default?mqso=60178356&partid=4116732> > > > > < > <http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupm > > > > ail/S=:HM/A=1853619/rand=625298721> > > > > Community email addresses: > > Post message: DTXpress@yahoogroups.com > > Subscribe: DTXpress-subscribe@yahoogroups.com > > Unsubscribe: DTXpress-unsubscribe@yahoogroups.com > > List owner: DTXpress-owner@yahoogroups.com > > > > Shortcut URL to this page: > > < <http://groups.yahoo.com/group/DTXpress>> > > > > Alternate DTXpress site: > > < <http://www.dtxpressions.com>> > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > > < <http://docs.yahoo.com/info/terms/>>. > > ________________________________________________________________________ > > This email has been scanned for all viruses by the MessageLabs Email > > Security System. For more information on a proactive email security > > service working around the clock, around the globe, visit > > < <http://www.messagelabs.com>> > > ________________________________________________________________________ > > > > ************************************************************************** > The information transmitted herewith is sensitive information intended > only > for use to the individual or entity to which it is addressed. If the > reader > of this message is not the intended recipient, you are hereby notified > that > any review, retransmission, dissemination, distribution, copying or other > use of, or taking of any action in reliance upon, this information is > strictly prohibited. If you have received this communication in error, > please contact the sender and delete the material from your computer. > > ________________________________________________________________________ > This email has been scanned for all viruses by the MessageLabs Email > Security System. For more information on a proactive email security > service working around the clock, around the globe, visit > <http://www.messagelabs.com> > ________________________________________________________________________ > > > Yahoo! Groups Sponsor > ADVERTISEMENT > click here > <http://rd.yahoo.com/SIG=12c9a7vp7/M=267637.4116732.5333197.1261774/D=egro > upweb/S=1705031972:HM/EXP=1071607957/A=1853618/R=0/*http://www.netflix.com > /Default?mqso=60178338&partid=4116732> > > <http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupm > ail/S=:HM/A=1853618/rand=248974184> > > Community email addresses: > Post message: DTXpress@yahoogroups.com > Subscribe: DTXpress-subscribe@yahoogroups.com > Unsubscribe: DTXpress-unsubscribe@yahoogroups.com > List owner: DTXpress-owner@yahoogroups.com > > Shortcut URL to this page: > <http://groups.yahoo.com/group/DTXpress> > > Alternate DTXpress site: > <http://www.dtxpressions.com> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > <http://docs.yahoo.com/info/terms/>. > ________________________________________________________________________ > This email has been scanned for all viruses by the MessageLabs Email > Security System. For more information on a proactive email security > service working around the clock, around the globe, visit > <http://www.messagelabs.com> > ________________________________________________________________________ > ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs Email Security System. For more information on a proactive email security service working around the clock, around the globe, visit http://www.messagelabs.com ________________________________________________________________________
2003-12-17 by 4dddd@web.de
Jepp! I set the spec. rejection values to 0 and everything works fine. Thanks for your help Daniel