Digital BW, The Print

My words thanks a lot to Paul and his helpfullness here


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Glenn" <glennrbarry@...> wrote:
>
> Paul,
> 
> we've had numerous people chime in and give you sincere thanks for your help to their problems.
> 
> Now I'm somewhat of a lurker on the list, but I feel compelled to say you're a Prince among men, you've got such a generous spirit and make it such a privelege to be part of the group.
> 
> I've personally benefitted from your work and your generosity and I'm just feeling the urge to say so right now
> 
> peace out
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "luxlebis" <luxlebis@> wrote:
> >
> > 
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul" <roark.paul@> wrote:
> > >
> > > "luxlebis" <luxlebis@> wrote:
> > > 
> > > ...
> > > >  I tried the curves in the link and they printed way to light with my r-285.
> > > 
> > > 
> > > The curves were for the 220, but they show the approach -- at least with Eboni installed.  Note that if a 21-step test print produces a smooth curve, even if light, it might linearize with Create ICC-RGB.  See http://www.paulroark.com/BW-Info/Embedding_Photoshop_Curves_in_ICCs.pdf
> > > 
> > > 
> > > When PKN is installed, run all of the curves up to the full-on position to turn on the K position.  You'll have to come up with your own curves.  
> > > 
> > > Paul
> > > www.PaulRoark.com
> > >
> > Thank you !
> > I will start my experiments
> > By the way I´m overall much more impressed by the matte prints, and maybe I will buy a larger printer and try with eboni6 when I said good by to my darkroom, what sure will happen soon after seeing the results  with utd3 in the last two weeeks.
> > 
> > Marcus
> >
>