Digital BW, The Print

On 21/09/2012 22:17, Jacques Caron wrote:
> For the price, I think that I should try to explore in depth all the menus
> and see if I can use my SF200 accessory (batch scanning).

If the scanner is scanning, it's going to work. You probably just need to 
work through each screen of menus, one item at a time, using the advanced 
interface. Reading the manual may be necessary, some of VS settings and 
methods are a bit obscure :) A lot of things don't normally need changing 
from defaults. Obvious things to check, bit depth and scanning resolution 
set to the optical res of the scanner. The scan should exactly match the 
preview when all is good.

Once you have that figured out, save the configuration file. I use VS with 
a couple of different scanners and for various neg/pos types, and have a 
selection of configs saved that make it easy to swap around.

I believe (from memory, haven't checked) that the SF200 is supported, but 
as with NS, the exposure etc used for the first scan is applied to the 
following slides in the batch.

-- 
Regards

Tony Sleep
http://tonysleep.co.uk