Digital BW, The Print

Tom,

I have had the NoMoreCarts (same as Niagara and Conetech) CIS on my 1280 for
6 months and all that is required is to answer the Epson driver's question
to whether you really want to use none Epson cartridges with a "Yes" each
time before you make your first print after turning the printer on. Not a
big deal at all and the cartridges always reads full. Running Windows 2000
BTW.

Martin Wesley


----- Original Message -----
From: "husband_99" <thusband@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Wednesday, March 06, 2002 7:54 AM
Subject: Re: [Digital BW] (Newbie question) - Using a 1270 with MIS VM
cartridges


> Thanks John.  I guess it's now Niagra?  It still is kind of
> cumbersome as you have to stop printing.  The nomorecarts
> instructions read:
> 1)  Push the paper feed button down for 4+ seconds (the print head
> will
>      move into cartridge changing position).
> 2)  Remove the provided sensor clips.  You can replace them
> immediately.
> 3)  Push the paper feed button down briefly and the printer will do a
> charging
>      cycle (since it thinks you just installed a new cartridge).
>
> You are ready to continue printing.  The whole process takes a couple
> minutes.
>
> What if you're in the middle of a job?  I guess you make sure it
> shows full before starting?  What about uninstalling the software
> that shows how much ink is left?  Would that keep it going?
>
> Thanks again,
>
> Tom Husband
>
> > > It sure would be nice if there was a chipped system that always
> > > showed full without resetting and could use MIS inks too.
> > >
> > > Thanks,
> > >
> > > Tom Husband
> >
> > http://www.nomorecarts.com has the chipped carts
> >
> > Best,
> >
> > John V.
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>