Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] STS- C6 ink set

2014-11-26 by Paul Roark

Kelly,

Arches Bright White is what I use also. With any of the dilute inks or a full set of Carb-6, if you can provide the 21-step test strip LAB readings it'll help me determine if they are selling the same ink under different names.

Thanks,

Paul

On Wed, Nov 26, 2014 at 9:23 AM, kellyhealy@... [DigitalBlackandWhiteThePrint] <DigitalBlackandWhiteThePrint@yahoogroups.com> wrote:

Paul


I didn't mention I did my printing on Arches bright white as I was out of reg Arches. I will have reg Arches Monday or Tuesday and will print the step wedges then. The ink I used was for the 7880 STS #E78P-220MBK. I was just looking for enough ink to play with. If you can give me a STS part # iI will order some Wihen when my retirement check arrives the 1st.
Kelly


Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.