Digital BW, The Print

Unless you are worried about the printer doing something strange, 
just wait until it reports out of ink, then remove and replace both 
blocks holding the switches down. As the printer runs through a 
priming/cleaning cycle for both cartridges when one is replaced, this 
cuts down on ink waste.

Tim

> The folks at MIS said that the printer counts drops of ink used and
> will report an empty cartridge after some count has been exceeded.
> Should I "replace" the carts when the ink level indicators appear low
> in the driver interface dialog to preempt this problem?

-- 
Tim Spragens

http://www.borderless-photos.de
http://www.borderless-photos.com