Digital BW, The Print

Hej Bo,

You have said that you made your own CFS... what make of tubes did you
use... did you buy a kit from MIS and make it yourself, or make it from
parts you found in Sweden? Also, you note that you have just have holes open
to the air in your bottles! I think this is a bad thing, and who knows - it
may have been part of your problem - if solvent evaporates who knows what
will be left but pigments stacked up on each other (a nasty gunk indeed).
You need to make a breather line for your bottles so that air can get in,
but evaporation is limited from the bottles.

I am sorry to hear about your problems, and hope that you manage to get them
resolved.

Nij




> -----Original Message-----
> From: sm7bxd [mailto:sm7bxd@...]
> Sent: 14 May 2002 21:42
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: RED ALERT - Attension - MIS Black!
>
>
> Rhanks - if it that easy - then this must be know in industry.
> Then
> Solutions:
> 1/
> I might be able to find tubes made by Nalgalene or some other
> major deliverant that make polymere things that don't let air or
> anything through the plasics.
> 2/
> Find something to coat those tubes with (fat - grease - anything that
> is known to fix such things)that hinder this to happen!
>
> For sure this is not anything about handy - it's finding a soltion to
> the problem with this very dangerous tubes (if it's ONLY the tubes)
> or find another tube-setup that doesn't allow for this things to
> happen
>
<snip>