Digital BW, The Print

James,

Is there a problem with the output? Missing lines in the nozzle check? I
have let one my bottles run empty a couple of times and sucked air into the
lines. This did not effect the printer output at all and after I refilled
the bottles and ran a few prints the bubbles cleared out. Run it and see how
it goes.

Martin Wesley
http://www.borderless-photos.de/guests.html



----- Original Message -----
From: "James Haney" <jhaney@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>;
<piezography3000@yahoogroups.com>; <support@...>
Sent: Wednesday, June 12, 2002 9:38 PM
Subject: [Digital BW] CIS problems


>
>
> I was having problems with my printer and based upon several threads
on-line
> with users with similar configurations I decided it was time to get some
new
> cartridges for my CIS and re-prime the system.
>
> However, for some reason, neither my Black nor my Yellow line seem to be
> able to hold a vacuum and do not draw ink into the cartridges.
>
> There is currently air in both lines.
>
> What do I do now?
>
> James Haney
> jhaney@...
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or
"flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>