Digital BW, The Print

Bernhard,

The MIS-FSN is a cool neutral. Rather too cool for my taste. If you look in
the Files section of the group homepage in the folder:

Files > Ink Sets > MIS > MIS FS

you will find scans of wedges printed with both FS ink sets and information
on the trials I did blending FSN and FS-Standard at 90/20 and 50/50.

The 50/50 is close to the Warm Neutral PiezoTone, although I prefer the
PiezoTone.

So if you get the FSN hang onto the FS inks you have as you may want to try
blending them yourself.

Martin Wesley
http://www.borderless-photos.de/guests.html



----- Original Message -----
From: <Bernhard.Schuerlein@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, July 09, 2002 7:39 AM
Subject: Re: [Digital BW] Re: MIS inks with Piezo driver?


> Iam on a CIS. I went from the FS to the VM and now back to the FS. IF you
purge the carts and tubes by printing it takes quite a long time, about 20
A3 pages fully covered by a purge pattern. Its faster to build in a  new
CIS. The bad thing is that of course this is more expensive.
>
> Btw, having stepped back I find the FS way too warm. I have now ordered
the FS "neutral" ink. I found teh VM too dificult in terms of getting a
regular tone. I happened to get colour casts that were difficult to control
exactly.
>
> Has someone on the list experience with the "FS neutral" ink?
>
> greetings Bernhard
>
>
> ---- Original Message -----
>   From: vinyo88
>   To: DigitalBlackandWhiteThePrint@yahoogroups.com
>   Sent: Tuesday, July 09, 2002 4:36 PM
>   Subject: [Digital BW] Re: MIS inks with Piezo driver?
>
>
>
>   I am using the MIS VM inks and was thinking of switching to the FS
>   using a CIS System. My question is how difficult is it to purge the
>   old VM ink out?
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or
"flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>