Digital BW, The Print

I'm with Antonis...sounds like a paper thickness issue to me...at least if
the Photorag was the 308gm.  I run the 188gm PR and EAM with the same paper
setting and don't have a problem...but if I switch to a 300+gm paper and try
to use the EAM setting...I get banding.

Robert

On 7/31/02 12:46 AM, "antonisphoto" <antonisphoto@...> wrote:

>> I have tried to find info on banding problems that I am having but have not
>> been successful. I have a 7000 with MIS FS inks and imageprint rip. I just
>> starting getting these using current setup. Today did a print on photorag
>> and had banding, did to cleaning cycles and used EAM and looked good.
> Went
>> back to photorag and back came the bands. They are very slight but I can
> see
>> them. At 8x it looks as if one of the inks is not squirting. These are
>> horizontal bands. My studio is 90deg plus with high humidity ( only use ac
>> when I am working)so that might be a cause.? Thanks for any help.
>> Bill Giffen