Digital BW, The Print

Richard, did just that Sunday. All I did was unscrew the cap on the 
new bottle, clamped off the tubing for the ink I was replacing, 
nscrewed that cap and with a small funnel poured it in. A slight 
swish and unclamped the tubing and started printing

Vinny

--- In DigitalBlackandWhiteThePrint@y..., "Richard Sintchak" 
<richard@c...> wrote:
> Hello all,
> 
> My first bottles of my CFS filled with FS-N are about 2/3 empty.  I
> thought I remember reading on this list that one should not go much
> below 1/3 of ink left before adding more.  New 4 oz. bottles of ink
> just arrived from inkjetgoodies today.  Since I've never done this I
> want to make sure I do it right.  Do I just unscrew the caps on the
> bottles and simply pour more ink in?  Any need to shake or mix the
> bottles, either the old ones or new ones first?  Perhaps it is as
> simple as it sounds but if someone could re-assure me or add any 
hint
> or two of something I might be forgetting I'd appreciate it.
> 
> Thanks.
> 
> Best regards,
>  Richard