Digital BW, The Print

Sorry, I assumed CFS.  MIS offers clamps to replace the Epsons -- you know,
the clamps that originally hold the OEM carts in place.  Superior
arrangement, they claim, to supplement the felt pads.  I only mentioned them
because they were my first clue that the color cartridge was not fully
seated.

In that regard can I safely (not too messily) pull the cart out and try to
reseat it?

Glenn



----- Original Message -----
From: "Jerry Olson" <jerryolson@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Thursday, October 03, 2002 6:44 PM
Subject: Re: [Digital BW] F-16 failure -- new CFS


> What is a modified cartridge clamp?  I'm using an inkjetgoodies CIS
system.
> There is nothing to hold the cartridges in except the felt pads, what
> are you trying to close?
>
> Jerry
>
>
>
> Glenn Thureson wrote:
> >
> > Jerry,
> >
> > I can't push the color cart in as far as the black one -- when I try to
push
> > it down farther, it flexes the whole cart hold (and, I presume, the
heads).
> > I'm using the Modified Cartridge Clamps, and the color clamp is a doozy
to
> > close.  Should I have removed the felt pads?
> >
> > Glenn