Digital BW, The Print

I didn't know there were such clamps.  Yes, you can pull them up and 
reseat them, as many times as you want. No
problems should arise. you must hit that little switch in there so it 
recognizes the cartridges.

Jerry

Glenn Thureson wrote:
> Sorry, I assumed CFS.  MIS offers clamps to replace the Epsons -- you know,
> the clamps that originally hold the OEM carts in place.  Superior
> arrangement, they claim, to supplement the felt pads.  I only mentioned them
> because they were my first clue that the color cartridge was not fully
> seated.
> 
> In that regard can I safely (not too messily) pull the cart out and try to
> reseat it?
> 
> Glenn
> 
> 
> 
> ----- Original Message -----
> From: "Jerry Olson" <jerryolson@...>
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Sent: Thursday, October 03, 2002 6:44 PM
> Subject: Re: [Digital BW] F-16 failure -- new CFS
> 
> 
> 
>>What is a modified cartridge clamp?  I'm using an inkjetgoodies CIS
> 
> system.
> 
>>There is nothing to hold the cartridges in except the felt pads, what
>>are you trying to close?
>>
>>Jerry
>>
>>
>>
>>Glenn Thureson wrote:
>>
>>>Jerry,
>>>
>>>I can't push the color cart in as far as the black one -- when I try to
>>
> push
> 
>>>it down farther, it flexes the whole cart hold (and, I presume, the
>>
> heads).
> 
>>>I'm using the Modified Cartridge Clamps, and the color clamp is a doozy
>>
> to
> 
>>>close.  Should I have removed the felt pads?
>>>
>>>Glenn
>>
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or &amp;amp;quot;flames.&amp;amp;quot;
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various resources on the homepage. 
> 
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
>