Digital BW, The Print

Thanks, James.  Thanks to this crew, I'm in business.

Glenn

----- Original Message ----- 
From: "jim hayes" <jimhayes@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Friday, October 04, 2002 10:51 PM
Subject: Re: [Digital BW] F-16 failure -- new CFS


> This is the only post I saw on this so I don't know the thread. But 
> I'll just jump in and say that if you're using an f-16 you probably 
> have an 1270/1280/1290. AFAIK, only the 1160, 860, maybe 3000, etc has 
> a switch. The chipped printers sense the cart through the chip so you 
> don't have to push on a switch.
> 
> Watch out for blowing out chips (and therby sending f-16 into a tizzy) 
> if you pull up or push down on carts slightly- if printer is not 
> turned off and unplugged, there is a fair chance you can blow out the 
> MIS chips and you would then have to get free new ones from MIS and 
> install. In fact, this is what the cart clamps help alot in preventing 
> (red light errors when carts ride up). I don't know what problems you 
> were having but if you don't have the modified cart clamps, you should 
> get them- they work like a charm and are cheap, easy to install. $10 
> US for both.
> Jim H.
>