should have read " The > default setting is black 0 and hilight 1 - which needs to be 0 IMO Julian ----- Original Message ----- From: "Julian Thomas" <julianthomas@...> To: <DigitalBlackandWhiteThePrint@yahoogroups.com> Sent: Friday, November 29, 2002 10:58 AM Subject: Re: [Digital BW] Vuescan > If you are getting clipping with the endpoints set at 0 and 0 you are at the > limits of your scanner or the neg is bad. I sometimes get shadow clipping on > the epson 1680 on a bad neg (image scans give you a neg so white is black > etc). Using the Scan Histo you can see if what you set will clip. The > default setting is black 0 and hilight 1 - which needs to be ) IMO. Also you > can try adjusting the Image Curve to get a good histo - you'll need to reset > the endpoints though. > I want a BW scan in PS which is basically Raw data with as little > interference as possible - then do as much curves/levels etc in 16bit in PS. > Julian > > ----- Original Message ----- > From: "Tony Terlecki" <ajt@...> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com> > Sent: Friday, November 29, 2002 10:29 AM > Subject: Re: [Digital BW] Vuescan > > > > Julian, > > > > How do you set endpoints outside the data? Vuescan seems to express the > > endpoints as percentage values frmo 0 to 100% where you can clip data but > > not compress it. Can you set values lower than 0% or higher than 100%, or > > is it simply a matter of readjusting the endpoints using the levels or > > curves tools in PS afterwards? > > > > -- > > Tony Terlecki > > ajt@... > > Running Debian/GNU 3.0 Linux > > > > On Fri, Nov 29, 2002 at 10:04:20AM +0100, Julian Thomas wrote: > > > All I do is set the endpoints slightly outside the data - you can check > this > > > with the before and after histos - and scan as a 16bit image file. > Although > > > I can't get good colour with it (or silverfast) so am back on the Twain. > > > Julian > > > ----- Original Message ----- > > > From: "Editor P.O.V. Image Service" <editor@...> > > > To: <DigitalBlackandWhiteThePrint@yahoogroups.com> > > > Sent: Friday, November 29, 2002 5:38 AM > > > Subject: Re: [Digital BW] Vuescan > > > > > > > > > > > > > > > > > > Julian Thomas wrote: > > > > > > > > >Jerry, you'll find endpoint selection under the 'colour' tab - there > are > > > no > > > > >curves as such. > > > > > > > > > >Julian > > > > >- > > > > > > > > > Jerry, > > > > > > > > I used to wonder about that.. > > > > > > > > > > > > Now, I generally agree with Dave Tobie that I really just want my > > > > scanner software to shuttle the data (as intact and untweaked as > > > > possible to my machine)... > > > > > > > > I want the scanner software to do things like adjust the hardware for > > > > exposure and focus, etc. BUT I don't want it massaging my data in > > > > software (even though Ed's levels software seems better than the PShop > > > > defaults) -- it's like scanner profiling -- it's a nice idea, BUT if > I'm > > > > correcting things in photoShop, I'd rather have control and work from > > > > the original data... Instead of taking a chance on having some lost in > > > > conversion. Heck, if I need the speed, I can create curves and batch > > > > process in PShop to the same effect.. > > > > > > > > Keith > > > > > > > > > > > > > > > > "Just some guy," and founder of the Multiverse's largest EPSON printer > > > > User Community (highly recommended by Vogon Poets and MegaDodo > > > > Publications), at: > > > > > > > > http://groups.yahoo.com/group/EPSONx7x_Printers/ > > > > > > > > "For the rest of you out there, the secret is to bang the rocks > together > > > > guys" > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls > and > > > other resources as they are often being updated. The page is at: > > > > > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > > > > > If you wish to receive no emails or just a daily digest, or you wish > to > > > unsubscribe, please edit your Membership preferences by visiting this > same > > > page. > > > > > > > > Please follow these basic guidelines: > > > > - Include your full name with your message. > > > > - Include the address of your website, if you have one. > > > > - As threads develop, trim off excess portions of earlier messages to > keep > > > them short. > > > > - As the topic of a thread changes remember to change the subject > header. > > > > - Good manners are required at all time. No personal attacks or > > > &amp;quot;flames.&amp;quot; > > > > - Complete your Yahoo profile. > > > > - Before posting a question, search the message archives and the > various > > > resources on the homepage. > > > > > > > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > > > > > > > > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and > other resources as they are often being updated. The page is at: > > > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > > > > > Please follow these basic guidelines: > > > - Include your full name with your message. > > > - Include the address of your website, if you have one. > > > - As threads develop, trim off excess portions of earlier messages to > keep them short. > > > - As the topic of a thread changes remember to change the subject > header. > > > - Good manners are required at all time. No personal attacks or > &amp;quot;flames.&amp;quot; > > > - Complete your Yahoo profile. > > > - Before posting a question, search the message archives and the various > resources on the homepage. > > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and > other resources as they are often being updated. The page is at: > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > > > Please follow these basic guidelines: > > - Include your full name with your message. > > - Include the address of your website, if you have one. > > - As threads develop, trim off excess portions of earlier messages to keep > them short. > > - As the topic of a thread changes remember to change the subject header. > > - Good manners are required at all time. No personal attacks or > &amp;quot;flames.&amp;quot; > > - Complete your Yahoo profile. > > - Before posting a question, search the message archives and the various > resources on the homepage. > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. > > Please follow these basic guidelines: > - Include your full name with your message. > - Include the address of your website, if you have one. > - As threads develop, trim off excess portions of earlier messages to keep them short. > - As the topic of a thread changes remember to change the subject header. > - Good manners are required at all time. No personal attacks or &amp;quot;flames.&amp;quot; > - Complete your Yahoo profile. > - Before posting a question, search the message archives and the various resources on the homepage. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >
Message
Re: [Digital BW] Vuescan
2002-11-29 by Julian Thomas