Digital BW, The Print

I used the

"10 cc Terumo Plastic Syringe"

fitted with the

"MIS Bottom Fill Adapter"

found at

http://www.inksupply.com/index.cfm?source=html/accessory.html

The adapter is inserted into the bottom exit port of the problem cart in the
CIS/CFS. There is a rubber seal in the cart which will help form a vaccuum
when pulling on the syringe plunger. If all is well ink flows freely into
the syringe through the CIS/CFS tubing & cart.

Good luck, Igor.
-BK


----- Original Message -----
From: "igorw2001" <iwesdorp@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Friday, November 29, 2002 7:02 AM
Subject: [Digital BW] Re: Clogs from hell - maybe sometimes it's the ink?
(cross posted)


> Thanks for sharing your experience.
>
> About some details:
> Do you mean you just stuck the syringe into the CIS and sucked? Did
> it fit so precisely that you could get a vacuum?
> Or did you attached the syringe to the nipple inside the printhead?
>
> (I'm asking this because I might have a similar problem with my CIS
> and old Piezo ink).
>
> Thanks,
>
> Igor
> Amsterdam