Digital BW, The Print

Treadwinkle (what a great name!),

If you are using the Piezo driver, the MIS FS-N inks should work 
seamlessly, or alomst so.  You need to worry about FS-E inks (or 
other workflows) only if you plan to use the Epson driver.  Make sure 
the inks are in the right positions for the driver of your choice.

Good luck.

Shilesh

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Jeff Randall 
<jrandall@c...>" <jrandall@c...> wrote:
> The hextone MIS FS-N inkset (which really is a quadtone inkset 
where 
> C=Pc and M=Pm) will not work with the Epson driver.  The Epson 
driver 
> expects lighter shades of Pc and Pm.  MIS sells the FS-E inkset 
that 
> works with the Epson driver.  You can use the Woolf lumped (non-
> partitioned)workflow or can try the 1270 RGB Partitioned workflow I 
> developed as a starting point (see Files|Ink Sets|MIS|MIS FS).
> 
> Good Luck.
> 
> Jeff Randall
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "treadwinkle 
> <VOLveeta@b...>" <VOLveeta@b...> wrote:
> > I'm running a 1280.  I've been using the Selenium carts, great 
> > results, using the Piezo plug in, but the cost is killing me.  I 
> > ordered a CIS with MIS Full Spectrum Neutral w/generations 
black.  
> > Any up front pointers?  Will I see similar results with the plug-
in 
> > or should I learn this curves stuff? :-)
> > 
> > Thanks for any info!!!
> > 
> > Treadwinkle