Digital BW, The Print

Antonis and Robert,

I downloaded OPM and congratulate all those involved for such a 
straightforward and elegant application.

I tried Antonis' two profiles plus some blends on my 2200.  Great 
step wedges and separation, and beautiful images, but with two 
problems.

The 100% patch (and only the 100% patch) had banding, and there was a 
braid-looking effect in images on thin objects (things that look like 
pipes, for example).

To eliminate my 2200 as the cause of the problem, I did a nozzle 
check and printed my test image and step wedges through two other 
printing applications.  These were all perfect and didn't exhibit 
either of the OPM problems.

Any ideas what is happening? 

Thanks to all who participated in this project.  It looks better than 
IP 5 and is easier to use than anything else I've tried.

A few other questions.  IJC, as purchased, will have a full array of 
profiles, correct?  And, do you know which printers will be covered 
besides those currently in the free OPM download?

Helene