Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "jeffsstudio9" 
<jeff@w...> wrote:
> Can't help with the repair bur I am willing to bet that every time 
> you print head tripped on the tubing you were printing a relatively 
> small image or one that allowed the print head to  rapidly change 
> directions.

Actually, that wasn't the case. The prints were at least 8" wide. 
With the original CIS, the tubing was just a little too long and I 
solved the problem with a piece of ½" dowel taped to the side of the 
black cart. Same effect as you achieved via your solution.

Yesterday, the print again was 8" wide. And the arm wasn't sagging. 
I'm not sure why I suddenly had the problem again after so many 
months of operations without experiencing it.

Tom Keesling
Intelligent Design, Inc.