Digital BW, The Print

Hans,

I would recommend changing the cartridge part of the CFS.  The gray inks are
slightly warmer, and the entire inkset uses an entirely new base to allow it
to print on RC paper.

The black ink is sensitive to dye ink pollution.  I'm not sure if there is
enough dye in the VM K to trigger the problem, but I would not take a
chance.

I have had no problems with the new inkset.  There were some initial
problems with a mistake in mixing, defective CIS carts, and, apparently, dye
ink pollution.  Those are the only patterns I've seen.  There have been a
few questions come up that don't fit any pattern.  So, it's still early in
the inkset's usage, and I think MIS is appropriately covering itself by
being cautious.  To me, it's a big improvement, however.

Paul
http://www.PaulRoark.com
___________________________________

-----Original Message-----
From: Hans Nohlberg [mailto:chiahans@...]
Sent: Monday, May 05, 2003 3:59 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] Compability old/new MIS WM


Hi all of you
Sorry if this has been up before.
But do I dare, just to clean the CFS bottles with the old MIS WM and
make a refill with the new one, think it's the 4.3.5 version.
MIS says it takes 4-5 refills to change the ink in the carts.
But how big is the difference in "color" between the old and new inks?
Printing on 1290 using Pauls curves.
Can I expect "solvent" clogging or other problems?

TIA
Hans

BTW anyone who has experience from the 2000P and new WM?
Atelier Pictoform
Chia N-L\ufffdfqvist & Hans Nohlberg
Hed\ufffdsgatan 5
SE-412 53 G\ufffdteborg
SWEDEN

+46  (0)31181414

(Bes\ufffdk/visit Hed\ufffdsgatan 6)

www.artphotocollection.com


Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- Include your full name with your message.
- Include the address of your website, if you have one.
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- As the topic of a thread changes remember to change the subject header.
- Good manners are required at all time. No personal attacks or
"flames."
- Complete your Yahoo profile.
- Before posting a question, search the message archives and the various
resources on the homepage.




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/