Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] help with developing problem

2003-05-23 by Steven Karafyllakis

I had a similar problem with FP4 and Pan F a few years back. Both 
films were purchased from B&H, and I took them on a trip to Greece 
with out realizing I had a problem. My take is that it was a fungus, 
but I suppose it could also have been a manufacturing problem. I 
don't think it could be a development problem unless there is some 
particulate matter in the developer or your first water bath 
(assuming you use one)that inhibits development. In my case It was 
many years before I bought B&W film from B&H again. Best luck 
figuring it out, it's a tough one!

Steve Karafyllakis.
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Stephen 
Kobrin" <skobrin@h...> wrote:
> It is relatively new and not gray market.  It was refrigerated, 
but 
> there were two rolls and one was out of the refrigerator for two 
days 
> before I shot it.  I just checked with an 8 power loupe and can 
> barely see the specs...but they are there when I look at a 5X7 
(print 
> size) scan, especially when I zoom in at the "fit on screen" level.
> 
> I will clean everything thoroughly and process the next roll with 
> bottled water.  The specs are much to small be be dust from the 
> drying process.
> 
> Thanks for the suggestions.,
> 
> Steve
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Mark Savoia 
> <mark@c...> wrote:
> > How old is the film? Was it gray market? Was it refrigerated? If 
so 
> did 
> > it have plenty of time to warm up or is it possible it had 
moisture 
> > condense on it? Could be a fungus. Do you have more unexposed 
rolls 
> you 
> > could have processed elsewhere (lab, friend, etc.)? Did you call 
> Ilford 
> > yet? They are VERY good about troubleshooting.
> > Mark
> > 
> > Stephen Kobrin wrote:
> > 
> > > The spots are black, but are virtually impossible to see with 
a 
> five
> > > power loupe.  In fact,they were not obvious in the prescan and 
> only
> > > apparent in the 5x7 PS image -- very obvious when I zoomed in 
> once. 
> > > However, they are apparent in a 5X7 print.  I really cannot 
tell
> > > which side of the negative they are on.  Very hard to see most 
of
> > > them.  It is also of interest that they are discrete spots.
> > >
> > > Steve
> > >
> > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Stephen
> > > Petegorsky <petegorsky@e...> wrote:
> > > > Stephen - do you mean that the spots on the negatives were 
> clear or
> > > black?
> > > > Do they appear to be in the image or on top of the emulsion 
or
> > > backing??
> > >
> > >
> > > Yahoo! Groups Sponsor
> > > ADVERTISEMENT
> > > Click Here! 
> > > 
> 
<http://rd.yahoo.com/M=244522.3313099.4604523.1261774/D=egroupweb/S=1
7
> 
05019182:HM/A=1595053/R=0/*http://ashnin.com/clk/muryutaitakenattogyo
?
> YH=3313099&yhad=1595053> 
> > >
> > >
> > >
> > > Please visit the Group Homepage to check the Files, Bookmarks, 
> Polls 
> > > and other resources as they are often being updated. The page 
is 
> at:
> > >
> > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > >
> > > If you wish to receive no emails or just a daily digest, or 
you 
> wish 
> > > to unsubscribe, please edit your Membership preferences by 
> visiting 
> > > this same page.
> > >
> > > Please follow these basic guidelines:
> > > - Include your full name with your message.
> > > - Include the address of your website, if you have one.
> > > - As threads develop, trim off excess portions of earlier 
> messages to 
> > > keep them short.
> > > - As the topic of a thread changes remember to change the 
subject 
> header.
> > > - Good manners are required at all time. No personal attacks 
or 
> flames
> > > - Complete your Yahoo profile.
> > > - Before posting a question, search the message archives and 
the 
> > > various resources on the homepage.
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> Service 
> > > <http://docs.yahoo.com/info/terms/>.
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.