Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] Clogging on Epson 1200 MIS CFS

2003-07-15 by Keith R.

I am having a similar problem. I just installed the ultratones in my 
1200 and am getting good nozzle checks on all but the black cart. I 
have run cleaning cycle after cycle and still the same thing. Could 
someone explain how the "windex cleaning" is done. By the way, the 
ink that I replaced was MIS original hextones. I don't believe they 
were dyes.
Thanks in advance

Keith Randolph   


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@v...> wrote:
> If you had dye in the printer before the UT ink, the clogging might 
be
> caused by the dye that is left on the pad.  With the 1280 that I 
converted
> from dye to UT, this happened.  Rinsing the pad with Windex and 
using
> Windex-soaked paper towel strips to wipe the head took care of the 
problem.
> 
> Paul
> http://www.PaulRoark.com
> _______________________________________
> 
> -----Original Message-----
> From: Jim [mailto:ho_yeah@y...]
> Sent: Friday, July 11, 2003 7:16 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Clogging on Epson 1200 MIS CFS
> 
> 
> 
> I am using MIS UltraTone CFS system on my Epson Stylus 1200. It
> worked prefectly fine until 2 days ago when one of the nozzle on the
> Light Magenta got clogged(a single gap found in the nozzle check
> pattern). I have never removed the CFS cartridge since I installed
> it, so I assume there should not be an air get inside the cartridge.
> I also use the printer almost 5 days a week. I have done so many
> cleaning cycles(6 cleaning cycles in a row, and again) and purging
> pattern printings(more than 6 letter size pages), but still can't 
get
> that nozzle unclogged(the single gap still apppears in the Light
> magenta nozzle check pattern). Without that nozzle, I can see lines
> in the shadow area on the printings.
> 
> Done anyone of you have any idea how to unclog that nozzle without
> sending it back to Epson for service? I have a perfect nozzle check
> expect the single gap in the light magenta.
> 
> Thanks
> 
> 
> -

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.