Shilesh, Thanks for the tips. I was thinking of using refilled OEM carts that do have the poppet valves in them. I would have to cut the tops off and use the dry sponge method of refilling. The difficultiy I see with this is that the tops are hard to cut off without damaging the vent system. I might have to machine new tops to make this work easily. I didn't know if the 1280 was fussy about carts being changed before they are empty. I am assuming that the chip maintains the ink level count and when you put a cart back in it just picks up where it left off. I'm up to 4 Espon printers now and running out of space. It would be great to consolidate functionality a bit and not have so many printers. Thanks for the info. Scott ----- Original Message ----- From: "Shilesh Jani" <shilesh.jani@...> To: <DigitalBlackandWhiteThePrint@yahoogroups.com> Sent: Monday, July 21, 2003 2:14 PM Subject: [Digital BW] Re: Swapping carts in a 1280 > Hey Scott, > > I do this all the time with OEM and FS (vacuum filled) carts. But, a > couple of things you may want to consider: > > (1) UT inks are different from VM and FS inks. > (2) It is best not to remove partially used UT (or FS, VM, etc.) inks > for reuse later. These carts do not have poppet valves in the exit > ports, so you may introduce air in the carts. But OEM inks can go in > and out any time you want. So either use up all of the UT before > removing, or toss the carts. > > Hope this helps. > > Regards. > > Shilesh > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Scott > Hendershot" <scott@p...> wrote: > > I have a question about swapping carts in a 1280. > > > > I would like to try using the MIS Ultratone inks in my 1280 but > > would like to continue to use it for color as well. > > > > Is it ok to pull the color cartridge out and put in a ultratone > cart > > and then swap back after you are done printing B&W? > > > > My concerns are getting air in the printhead and possibly messing > up > > the on cart chip such that the cart becomes unuseable. > > > > Is anyone out there doing this? > > > > Thanks > > > > Scott > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. > > Please follow these basic guidelines: > - Include your full name with your message. > - Include the address of your website, if you have one. > - As threads develop, trim off excess portions of earlier messages to keep them short. > - As the topic of a thread changes remember to change the subject header. > - Good manners are required at all time. No personal attacks or flames > - Complete your Yahoo profile. > - Before posting a question, search the message archives and the various resources on the homepage. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
Message
Re: [Digital BW] Re: Swapping carts in a 1280
2003-07-21 by Scott Hendershot
Attachments
- No local attachments were found for this message.