Digital BW, The Print

Try TetraGun oil: it has a reasonable viscocity, is synthetic and with 
a good teflon content.

 I just noticed my E3000 making a vibration sound on each return 
motion of the head. A bit of this oil, actually, a tad more than very 
light, was needed to make it smooth. I plan to wipe it off and reapply 
after a bit of use frees the crud out from inside the sleeve bearing 
on to the shaft. 

PS: Don't forget the  front head rest guide flange ( at least on the 
E3000 ) 

Best,
Alex


> 
> Don't use WD-40 ...
> There are some great gun oils out there. Very, very thin layer.
>