Digital BW, The Print

> A few things to check.  Did you do a re-start after the QuadtoneRIP 2.0 
> installation?  Does your quadtonerip printer name in PrintCenter match 
> what is in the 1160-fs profile description file (see below)?  If not, 
> change the printer name in the 1160-fs descriptor file to match the 
> name of your quadtonerip printer, exactly as it is in printcenter and 
> then re-install the 1160-fs profile with Run-Quad-Profile.  May also be 
> a permissions problem - try doing a repair permissions with Disk 
> Utility.
> 
> Carl

Thanks Carl!

I got it working - but I did many things so I'm not totally sure what did the trick.

The printer name was the same as the profile description file - but I renamed the 
printer with the underscore for the space. Didn't seem to help.

I was working off a copy of the CurveDesign folder on my HD but kept getting 
Terminal errors everytime I dropped the 1160-fs file onto the window.

What worked - I think! - was working from the disk image of  QuadToneRip. With the 
CurveDesign window openned I dragged and dropped 1160-fs to the desktop to copy 
it. Doubled clicked Run-Quad-Profile from the disk image, then dragged and dropped 
the 1160-fs copy to the Terminal. That worked. If I dragged and dropped the 1160-fs 
file from the disk image to the Terminal window a crash would occur:

Exception:  EXC_BAD_ACCESS (0x0001)
Codes:      KERN_PROTECTION_FAILURE (0x0002) at 0x0000000c

I'll go over the instructions as I probably missed something.

Thanks again,

John V.