Digital BW, The Print

Hi Stephen!

I also had a clog on my 1200, after I installed the ultra tones. I 
use a CIS, by the way. Ans the fault it clogged was all mine. But I 
went back thru the archives, and other forums, and found a very good 
prcedure, buryed within the info at inkjetmall. The cleaning 
procedure can be found at: 
http://www.inkjetmall.com/store/cone_ts/index.html
Look at # 9: The clog from hell. I followed the instructions, as 
countless others have, and in a couple of hours, I was getting 
perfect nozzle checks.
Good luck!
KeithR
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Stephen Kobrin" 
<skobrin@h...> wrote:
> I left my 1200 with MIS VM inks for 2 1/2 weeks and came back to 
> clogs that will not go away, even after 9-10 cleaning cycles and a 
> number of full prints.  (I use prefilled carts.)  While I know this 
> topic has been covered at length on the list, I would appreciate a 
> suggestion of a reasonable first step before I delve into the 
> archives and go at this full tilt.
> 
> The strange thing is that there is a great deal of variation in the 
> nozzle check patterns with some not all bad and other where several 
> of the inks are hardly there.
> 
> Thanks for any help.
> 
> Steve