Digital BW, The Print

Thanks Keith

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Keith R." 
<kjrslr@e...> wrote:
> Hi Stephen!
> 
> I also had a clog on my 1200, after I installed the ultra tones. I 
> use a CIS, by the way. Ans the fault it clogged was all mine. But I 
> went back thru the archives, and other forums, and found a very 
good 
> prcedure, buryed within the info at inkjetmall. The cleaning 
> procedure can be found at: 
> http://www.inkjetmall.com/store/cone_ts/index.html
> Look at # 9: The clog from hell. I followed the instructions, as 
> countless others have, and in a couple of hours, I was getting 
> perfect nozzle checks.
> Good luck!
> KeithR
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Stephen 
Kobrin" 
> <skobrin@h...> wrote:
> > I left my 1200 with MIS VM inks for 2 1/2 weeks and came back to 
> > clogs that will not go away, even after 9-10 cleaning cycles and 
a 
> > number of full prints.  (I use prefilled carts.)  While I know 
this 
> > topic has been covered at length on the list, I would appreciate 
a 
> > suggestion of a reasonable first step before I delve into the 
> > archives and go at this full tilt.
> > 
> > The strange thing is that there is a great deal of variation in 
the 
> > nozzle check patterns with some not all bad and other where 
several 
> > of the inks are hardly there.
> > 
> > Thanks for any help.
> > 
> > Steve