Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, joe davajon 
<davajon@s...> wrote:
> Tom:
> 
> I had problems with that unit too.  In fact I had MIS send me 
another one
> but still had problems.  I found that it worked best if I just 
removed the
> guide and lined up the pins by eye.  I also found that I had to 
push the
> resetter against the cartridge hard enough to push the pins into the
> resetter a quarter of an inch or so and that seemed to work much 
better.
> Hope that helps!
> Joe D.

Thanks Joe.  That's what I had to do too although I'm not sure what 
you mean by removing the guide.  On both the re-setter and the 1280 
cartridge the guides are molded and part of the overall package.  
Maybe you're referring to the metal guide that came with it and is 
used on another printer?  I forget which printer.

I called MIS a second time and they said they would take a look.

Thanks again,

Tom