Digital BW, The Print

Martin:
One thing you have to be careful with feeding on the angle. If you are using
heavier paper, when the trailing edge snaps free of the feed shoot it will
be further from the print head then the rest of the print. This will cause
some banding on the trailing edge. If at all possible feed thicker paper
through the tractor feed slot. The paper goes into the printer in a straight
path and eliminates this difference between the print head and the paper.

Jim Davis
http://www.visual-artists.com
davis.jarthur@...
Fine art printmaker

----- Original Message -----
From: "Martin Wesley" <mwesley250@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Friday, October 05, 2001 12:21 AM
Subject: [Digital BW] Re: Looking for 3000 Advice


> Tyler,
>
> The angle feed sounds good. Like you I would have to put it back
> against the wall. It would have to go on the plywood shelf over my
> monitor but as long as the paper goes in at an angle I am sure I
> would have space to work it out.