Digital BW, The Print

Jim,

Thanks for the tip but if I go for a 3000, I will have to put its 
back to the wall and either front or rear angle feed. There seems to 
be quite a bit of printer to printer variation on this so maybe I 
will get lucky.

Martin

--- In DigitalBlackandWhiteThePrint@y..., "J. Arthur Davis" 
<jarthurdavis@e...> wrote:
> Martin:
> One thing you have to be careful with feeding on the angle. If you 
are using
> heavier paper, when the trailing edge snaps free of the feed shoot 
it will
> be further from the print head then the rest of the print. This 
will cause
> some banding on the trailing edge. If at all possible feed thicker 
paper
> through the tractor feed slot. The paper goes into the printer in a 
straight
> path and eliminates this difference between the print head and the 
paper.
> 
> Jim Davis
> http://www.visual-artists.com
> davis.jarthur@v...
> Fine art printmaker
> 
(snip)