Digital BW, The Print

Thanks Eddie...that's a start in my search for a solution!
Isabel

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Edward Wiseman" 
<pahts@c...> wrote:
> Isabel..
> The "blobs" are usually caused by filling the CIS bottles too high..
> You can alleviate THAT problem by RAISING your printer about an inch 
higher than the bottles..( I used an old "SHUTTERBUG" magazine under 
the printer)..Your other problem appears to be "banding"..Search the 
group archives..You may find an answer..
> I would of course also place a call to Media Street..
> Good Luck..
> 
> Eddie Wiseman
>   ----- Original Message ----- 
>   From: Isabel Cutler 
>   To: DigitalBlackandWhiteThePrint@yahoogroups.com 
>   Sent: Monday, October 06, 2003 8:39 PM
>   Subject: [Digital BW] Help needed with Niagara III Continuous Ink 
System
> 
> 
>   A friend who has the system advised me to get a refurbished Epson 
1280 
>   to use with this system for black and white since I couldn't get 
>   decent b/w from my Canon S9000.  
> 
>   The system hasn't worked right from the start.  Only 1 or 2 good 
>   prints (and they probably could be even better).  NOzzle checks 
have 
>   voids all over the place most of the time.  Numerous head 
cleanings 
>   don't help.
> 
>   Please check out this picture and tell me if you know what my 
problem 
>   is.  http://www.pbase.com/image/22046380
> 
>   Thank you.
> 
>   Isabel
> 
> 
>         Yahoo! Groups Sponsor 
>               ADVERTISEMENT
>              
>        
>        
> 
>   Please visit the Group Homepage to check the Files, Bookmarks, 
Polls and other resources as they are often being updated. The page is 
at:
> 
>   http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
>   If you wish to receive no emails or just a daily digest, or you 
wish to unsubscribe, please edit your Membership preferences by 
visiting this same page.
> 
>   Please follow these basic guidelines:
>   - Include your full name with your message.
>   - Include the address of your website, if you have one.
>   - As threads develop, trim off excess portions of earlier messages 
to keep them short.
>   - As the topic of a thread changes remember to change the subject 
header.
>   - Good manners are required at all time. No personal attacks or 
flames
>   - Complete your Yahoo profile.
>   - Before posting a question, search the message archives and the 
various resources on the homepage. 
> 
> 
> 
> 
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service. 
> 
> 
> [Non-text portions of this message have been removed]