Digital BW, The Print

Isabel..
The "blobs" are usually caused by filling the CIS bottles too high..
You can alleviate THAT problem by RAISING your printer about an inch higher than the bottles..( I used an old "SHUTTERBUG" magazine under the printer)..Your other problem appears to be "banding"..Search the group archives..You may find an answer..
I would of course also place a call to Media Street..
Good Luck..

Eddie Wiseman

  ----- Original Message ----- 
  From: Isabel Cutler 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Monday, October 06, 2003 8:39 PM
  Subject: [Digital BW] Help needed with Niagara III Continuous Ink System


  A friend who has the system advised me to get a refurbished Epson 1280 
  to use with this system for black and white since I couldn't get 
  decent b/w from my Canon S9000.  

  The system hasn't worked right from the start.  Only 1 or 2 good 
  prints (and they probably could be even better).  NOzzle checks have 
  voids all over the place most of the time.  Numerous head cleanings 
  don't help.

  Please check out this picture and tell me if you know what my problem 
  is.  http://www.pbase.com/image/22046380

  Thank you.

  Isabel


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:

  http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

  If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.

  Please follow these basic guidelines:
  - Include your full name with your message.
  - Include the address of your website, if you have one.
  - As threads develop, trim off excess portions of earlier messages to keep them short.
  - As the topic of a thread changes remember to change the subject header.
  - Good manners are required at all time. No personal attacks or flames
  - Complete your Yahoo profile.
  - Before posting a question, search the message archives and the various resources on the homepage. 




  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]

Thanks Eddie...that's a start in my search for a solution!
Isabel

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Edward Wiseman" 
<pahts@c...> wrote:
> Isabel..
> The "blobs" are usually caused by filling the CIS bottles too high..
> You can alleviate THAT problem by RAISING your printer about an inch 
higher than the bottles..( I used an old "SHUTTERBUG" magazine under 
the printer)..Your other problem appears to be "banding"..Search the 
group archives..You may find an answer..
> I would of course also place a call to Media Street..
> Good Luck..
> 
> Eddie Wiseman
>   ----- Original Message ----- 
>   From: Isabel Cutler 
>   To: DigitalBlackandWhiteThePrint@yahoogroups.com 
>   Sent: Monday, October 06, 2003 8:39 PM
>   Subject: [Digital BW] Help needed with Niagara III Continuous Ink 
System
> 
> 
>   A friend who has the system advised me to get a refurbished Epson 
1280 
>   to use with this system for black and white since I couldn't get 
>   decent b/w from my Canon S9000.  
> 
>   The system hasn't worked right from the start.  Only 1 or 2 good 
>   prints (and they probably could be even better).  NOzzle checks 
have 
>   voids all over the place most of the time.  Numerous head 
cleanings 
>   don't help.
> 
>   Please check out this picture and tell me if you know what my 
problem 
>   is.  http://www.pbase.com/image/22046380
> 
>   Thank you.
> 
>   Isabel
> 
> 
>         Yahoo! Groups Sponsor 
>               ADVERTISEMENT
>              
>        
>        
> 
>   Please visit the Group Homepage to check the Files, Bookmarks, 
Polls and other resources as they are often being updated. The page is 
at:
> 
>   http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
>   If you wish to receive no emails or just a daily digest, or you 
wish to unsubscribe, please edit your Membership preferences by 
visiting this same page.
> 
>   Please follow these basic guidelines:
>   - Include your full name with your message.
>   - Include the address of your website, if you have one.
>   - As threads develop, trim off excess portions of earlier messages 
to keep them short.
>   - As the topic of a thread changes remember to change the subject 
header.
>   - Good manners are required at all time. No personal attacks or 
flames
>   - Complete your Yahoo profile.
>   - Before posting a question, search the message archives and the 
various resources on the homepage. 
> 
> 
> 
> 
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service. 

> 
> 
> [Non-text portions of this message have been removed]