Digital BW, The Print

FYI I would not jump straight into purchasing IP at $495.  I have found
minimal added image quality with the 2100/2200 and good colour profiles for
colour work and QTR (Mac only) is in my opinion better for B&W.  Get the
2200 and test again...2c


From: "Ken Carney" <kcarney1@...>
Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
Date: Sun, 19 Oct 2003 20:02:34 -0500
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Subject: [Digital BW] Epson install problem after ImagePrint

Would greatly appreciate any advice.  I downloaded the ImagePrint demo,
liked it, thought I would get it and a new 2200.  However...after installing
the demo, my beloved 1270 will only print in one tone with the Epson
software (the typical red cast), no matter whether the image sent to it is
cold tone, warm tone or what.  I uninstalled the ImagePrint demo (not easy
to do), but still the same problem with the 1270.  So I uninstalled the 1270
as a printer and the Epson software.  I tried to reinstall (the Epson XP
driver with both USB and parallel), but the Epson software will not
recognize the printer as installed, though it is installed.  It will print
with the native XP drivers, but the Epson print software will get to
"installing your printer" and then hang.  Thanks for any advice on this
exotic question.  It's time to upgrade, but I would like to keep the 1270.

Regards,

  --Ken Carney
    www.kencarney.com


Yahoo! Groups Sponsor
 
 ADVERTISEMENT
 <http://rd.yahoo.com/M=251812.4052765.5265175.1261774/D=egroupweb/S=1705019
182:HM/A=1754451/R=0/SIG=11tfoi6qi/*http://www.netflix.com/Default?mqso=6017
8323&partid=4052765>

Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- Include your full name with your message.
- Include the address of your website, if you have one.
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- As the topic of a thread changes remember to change the subject header.
- Good manners are required at all time. No personal attacks or flames
- Complete your Yahoo profile.
- Before posting a question, search the message archives and the various
resources on the homepage.




Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]